Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
Speed range is 300-23000 rpm, and the internal suction homogeneous structure can effectively homogenize, emulsify and extract. Stirrer can be used at low speed.
Temperature range -40~ 150 ℃, humidity control 30~ 98% R. H, Temperature Uniformity ≤ +/- 2 ℃, using PID control solid state relay and steam boiler humidification to ensure stable and reliable operation.
Adopt magnetic yoke structure, lifting force up to 7.1kg, pole distance adjustable 0-220mm, Sensitivity to meet A1 test piece display requirements, suitable for welding and Pressure Vessel internal work.
With a 0-220mm adjustable magnetization pole distance and a lifting force of ≥ 22.2kg, it supports both AC and DC power supply modes, with a battery life of up to 8 hours. The integrated molding design is convenient for high-altitude and confined space operations.
Adopt porcelain frame nickel-chrome wire heater and steam boiler humidification system, equipped with independent over-temperature protection device, Temperature Fluctuation ≤ +/- 0.5 ℃, Humidity Fluctuation +/- 2% RH, to ensure the test environment is stable and reliable.
Simultaneous measurement of wind speed, wind temperature, wave height, wind level and air volume, equipped with low friction bearing impeller Sensor to ensure +/- 2% accuracy, support 24 data storage and USB/Bluetooth communication methods.
Equipped with a 200mm diaMeter pick-up cylinder and an 8-liter capacity, the manual Stirrer works in tandem with an 80-mesh forming filter for uniform Pulp distribution and efficient dehydrating.
Using electronic constant force speed control circuit, digital direct display Rotation speed, Power 500W, Speed range 100-2000rpm, low reliable operation noise, can calculate the relationship between stirring line speed and chemical reaction rate.
Temperature range -30~ 150 ℃, Humidity Control Range 30~ 98% R.H., using PID control solid state relay and steam boiler humidification, equipped with multi-layer conductive film observation window and multiple safety protection systems.
Adopt porcelain frame nickel-chrome wire heater and steam boiler humidification system, equipped with independent over-temperature protection device, Temperature Uniformity ≤ +/- 2 ℃, support the upper air supply and lower return air circulation mode, ensure the test environment is stable and reliable.
Adopt sealing solvent system to reduce water vapor interference, support 100 titration methods, Measurement range covers 1ppm to 5%, built-in automatic drift correction function, equipped with electronic adjustment Magnetic Stirrer.
Four-station independent operation does not interfere with each other, the brushless DC motor provides 12.5mN · M torque, temperature control accuracy of +/- 1 ℃, supports automatic temperature control function and stepless speed regulation of 0~ 1500rpm, to meet the needs of multi-sample synchronous processing.
