Suitable for 1 × 10-2 - 1 × 102um/(Pa. S) Air Permeability Range, Measurement accuracy of +/- 1ml (< 100ml), 304 stainless steel fixture and silicone sealing to ensure long-term corrosion resistance and sealing, support multi-gear measurement.
Measurement range 0~ 1000ml/min, pressure difference 0.1~ 2.0kpa, stainless steel end cap and pure copper valve anti-corrosion structure, built-in fixture to avoid rubber pad peeling, suitable for a variety of materials Air Permeability accurate test.
Measurement range 0~ 1000ml/min or 0~ 17µm/(Pa · s), test area 10.0 +/- 0.05cm ², differential pressure accuracy +/- 0.01kPa, clamp ring coaxiality less than 0.05mm, suitable for medium Air Permeability paper testing.
Measurement range 0~ 1000ml/min, test area 10cm ², test area pressure difference 1kPa, suitable for a variety of industrial paper ventilation performance detection.
Measurement range 0~ 1000ml/min, test area pressure accuracy of +/- 0.01kPa, equipped with 10cm ² standard test area and 35.68mm clamping ring, support different duration test.
Vacuum Level 100 or 200 mm water column constant test, Measurement range 0-1000ml/min, test area 10cm ², support a variety of paper ventilation performance evaluation.
With imported corrosion-resistant rubber diaphragm, the ultimate pressure reaches 0.085MPa, the pumping speed is 30L/min, and the noise is lower than 50dB. It can operate continuously and stably for 24 hours without lubricating oil.
With imported corrosion-resistant rubber diaphragm, the pumping speed can reach 30L/min and the noise is lower than 50dB, which can operate continuously and stably in the oil-free state and is easy to maintain.
The test area is 30cm ², suitable for self-supporting and non-self-supporting coating testing, and the permeability of water vapor or Miscellaneous gaseous substances to the film can be determined by the wet Cup method or the dry Cup method.
Vacuum principle measurement paper breathability performance, Measurement range 0-1000ml/min, test area of 10cm ², suitable for a variety of industrial paper mass detection.
The test area is 50cm ², which supports two test modes of wet Cup method and dry Cup method, which can measure the permeability of water vapor and Miscellaneous gaseous substances to the film, and is suitable for coating performance evaluation under different environment conditions.
Test area of 10cm ², in line with a number of international standards, support self-supporting and non-self-supporting coating testing, can be measured by wet Cup method and dry Cup method of water vapor permeability, suitable for different environmental conditions.
Using PTFE pump head and composite diaphragm, strong corrosion resistance, maximum Flow rate 35L/min, Ultimate vacuum degree 15-20mbar, no pollution and maintenance, low noise operation stability.
Designed for specific types of thickness Gauges, it provides accurate Adjustment and adopts standard diaphragm structure to ensure accurate transmission of thickness measuring instruments and improve the repeatability of test results.
Using electromagnetic motor and diaphragm sealing Chamber, the maximum Vacuum Level is 0.08Mpa, full Teflon material is resistant to strong chemical corrosion, free of daily maintenance and long service life, suitable for positive and negative pressure dual-use scenarios.
