With eight Illuminant automatic switching and Metamerism functions, no preheating and no flickering, low energy consumption and no heat generation, high luminous efficiency, Illuminant includes D65, TL84, etc., and the color temperature covers 2700K to 6500K.
Set dispersion and sand grinding functions in one, complete two processes in a single container, speed range 130~ 3000rpm, grinding basket size Φ 80x60mm, high efficiency and easy to clean.
The three-phase asynchronous motor is safe and spark-free, can handle high viscosity materials and support long-term continuous work, grinding basket volume 1.8L, speed range 0~ 3000rpm/min, to achieve efficient dispersion and refinement of grinding.
Temperature control accuracy of +/- 0.5 ℃, equipped with eight standard test force, can accurately determine the melt flow performance of polymers at high temperatures, to meet a variety of material testing needs.
Full explosion-proof design to ensure safe operation, the main motor Power 22kW, grinding range 0-1450 rpm, equipped with 20L grinding basket and custom PTFE grinding sleeve, wear-resistant heat dissipation fast, hydraulic lift Travel 1200mm.
Equipped with eight Illuminant and three display modes, repeability accuracy of 0.03, support 16mm large diaMeter measurement, suitable for textured surfaces and wet objects, built-in whiteboard automatic correction, easy to operate.
The 4-sided design can be prepared with different film thickness films, and the eight sets of specifications cover the range of 5 to 1000 μm. The stainless steel material ensures durability and is suitable for a variety of substrates and liquid types.
The equipment is equipped with eight independent stations for simultaneous testing, supporting 24mm and 60.5mm Li Sharu motion trajectories, with a maximum motion range of 60.5mm. It uses a 395g fabric weight and a 2385g pressure clock system to achieve multi-standard material wear resistance evaluation.
The instrument is equipped with an eight-station synchronous test function, which supports 24mm and 60.5mm Li ShaRu motion trajectories, with a maximum motion range of 60.5mm. It meets a variety of standard requirements, is easy to operate, and counts intuitively.
Equipped with eight Illuminant and three display modes, repeability accuracy of 0.05, support 16mm measurement aperture, suitable for surface texture or wet objects, built-in whiteboard automatic correction, stable and efficient measurement.
The water pRoduction rate reaches 5L/h, the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, the desalination and sterilization rate is over 99%, supports intelligent control and a variety of water intake modes, suitable for laboratory environment use.
The eight-stage deep purification system ensures that the water quality is pure, the resistivity of the pRoduced water is 18.25MΩ .cm, and it is equipped with an intelligent Control system to realize automatic monitoring and a variety of water intake modes to meet the strict experimental requirements.
Eight-station control, Speed range 200-2200rpm, single-station stirring capacity of 1000ml; DC brushless motor noise is less than 27db, 316 stainless steel material corrosion resistance, IP64 Protection Rating splash-proof.
Application width 300mm, Spreader accuracy +/- 0.005mm, Drawdown blade can be quickly disassembled and cleaned, three independent temperature control oven to ensure uniform drying, suitable for a variety of substrates and Stock processing.
Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
