Using 1500W Power and 120mm dispersion disc, support frequency conversion speed regulation and continuous operation, servo brushless motor operation stable and efficient, dispersion disc corrosion resistance and removable replacement.
Double disc independent control can be operated by double person at the same time, the diaMeter of the throwing disc is 230mm, the Rotation speed is 900rpm, the transmission is stable and the noise is small, the operation and maintenance are convenient, and it is suitable for polishing requirements of various materials.
Double disc independent control can be used for double person operation at the same time, smooth transmission and low noise, throwing disc diaMeter 230mm, Rotation speed 650rpm or 800rpm optional, easy operation and maintenance.
Equipped with a 2200W servo brushless motor, the speed range is 0-3000rpm, and it supports 24-hour continuous operation. The dispersion disc can be disassembled and replaced to ensure stable and efficient sample processing.
Double disc independent operation can be used by double persons at the same time, the diaMeter of the throwing disc is 230mm, equipped with a polishing water supply system and a drawer-type sewage collection box, the transmission is smooth and the noise is low.
Double disc independent control can be operated by double person at the same time, the diaMeter of the throwing disc is 230mm, the Rotation speed is 900rpm, the transmission is stable and the noise is small, and the operation and maintenance are convenient.
The stepless speed range is 0-4000 rpm, the lifting stroke is 32 cm, and the working height can be flexibly adjusted. Equipped with 304 stainless steel dispersion disc, it is corrosion-resistant and easy to clean, and supports continuous and stable operation.
The linear velocity of blade disk is 10.5 m/s, the volume of material barrel is 1.8 L, and the aggregates are destroyed by strong impact and shearing to achieve high-efficiency dispersion and mixing, which is suitable for liquid material experiments.
Electric lifting platform Travel 500mm, speed range 0-2880rpm, maximum processing viscosity 30000cp, hexagonal screws connected to the dispersion disc for easy disassembly and assembly, long-term stable operation.
Double disc independent operation, Rotation speed 50~ 1400rpm stepless speed regulation, throwing disc diaMeter 230mm, equipped with water supply system and drawer type sewage box, smooth transmission and low noise.
Rotation speed is constant with brushless DC motor, output torque is large, support 3L Max. stirring capacity. Disc heating table heat concentration, with anti-corrosion liquid guide Tank design, improve operation safety and durability.
Adopt single chip microcomputer automatic control, grinding disc diaMeter 220mm, load weight up to 2.92kg, compact structure, easy assembly and disassembly, suitable for pigment physical performance inspection.
Mechanical design can be measured on any surface, measurement disc diaMeter 50mm, thickness 11mm, using hard grinding stainless steel material, equipped with aluminum free swirl/spin roller, the reading scale is clear and easy to read.
Mechanical design allows direct measurement on a variety of surfaces, no power supply required; hardened stainless steel material ensures durability, measurement disc diaMeter 50mm thick 11mm; equipped with aluminum free swirl/spin rollers for easy operation, reading scale directly engraved on the side.
Using electric lifting structure, low failure rate and easy to move; 0-3000rpm wide range speed regulation, with 80/100mm dispersion disc, can handle viscosity ≤ 25000cps material, to achieve efficient dispersion mixing.
