The stainless steel material ensures durability, the paddle width is 70mm, and the Rod length is 300mm. The design optimizes the mixing efficiency, and the medium and high speed operation pRoduces axial flow and local shear force, which is suitable for mixing various viscous liquids.
The stainless steel material ensures durability, and the paddle width of 70mm and Rod length of 350mm are designed for medium and high speed mixing, generating axial flow and local shear force, suitable for a variety of mixing needs.
The blade width is 70mm, the blade height is 1.8mm, the Rod diaMeter is 6mm, and the Rod length is 300mm; stainless steel material, used at medium and high speed, pRoduces axial flow and local shear force, suitable for a variety of mixed needs.
The four-blade structure makes the mixed medium flow radially up and down, forming strong turbulence and high shear force. The diaMeter of the 150mm paddle is suitable for medium and high viscosity liquids, which can effectively crush the particles in the liquid.
The stainless steel structure with a blade width of 70mm and a Rod length of 300mm can operate at medium and high speed, generating axial flow from top to bottom and local shear force, which is suitable for mixing various viscous liquids.
The stainless steel material ensures durability, the blade width is 70mm, the height is 1.8mm, the Rod diaMeter is 8mm, and the length is 350mm. The medium and high speed operation pRoduces axial flow and local shear force, which is suitable for a variety of mixed needs.
The use of low-speed intermittent barrel edge mixing, L-shaped paddle mixing design can be completed in five minutes uniform mixing, Speed range 0~ 60rpm, mixing process inks do not heat up, clean simple.
The stainless steel material ensures durability, the blade width is 70mm, the height is 1.8mm, the Rod diaMeter is 8mm, and the axial flow and local shear force are generated during medium and high speed operation, which is suitable for mixing various media.
The blade width is 70mm and the height is 1.5mm, the Rod diaMeter is 6mm and the length is 350mm, the stainless steel material is resistant to corrosion, and the medium and high speed stirring pRoduces axial flow and local shear force.
The stainless steel blade is 70mm wide and 1.8mm high, the Rod diaMeter is 6mm and the length is 350mm. Medium and high speed stirring pRoduces axial flow and local shear force, which is suitable for a variety of mixing needs.
Measurement range of 5-500μm with a three-blade design, LED Illumination Microscope and swirl/spin system for accurate assessment of Coating thickness and substrate defects.
Adopt double comma Blade Coating head and three independent temperature zone drying system, film accuracy up to +/- 0.005mm, drying temperature up to 250 ℃, equipped with full servo tension control and automatic deviation correction system, realize fully automated precision Spreader process from unwinding to rewinding
The blade width is 140mm and the Rod length is 800mm, which pRoduces tangential flow to form a high shear rate, which is suitable for polymer reaction and mineral dispersion, and effectively prevents medium deposition.
The four-blade design realizes gentle mixing, with a pulp blade diaMeter of 100mm and a Rod length of 500mm. It is suitable for medium and low speed operation, and the stainless steel material ensures durability.
Equipped with 0.5/0 7/1.0 mm three thickness die frame, using baseplate fixed structure to ensure film uniformity, metal drawdown blade design to meet long-term use needs.
