Complete 48 Sample Handling within 1 minute, adopt fully enclosed design to avoid cross-contamination, support 0-70Hz homogenization speed and low temperature grinding mode, and the noise is lower than 55dB to ensure a quiet experimental environment.
96 samples are ground in 1 minute, the noise is lower than 55dB by vertical oscillation, the sample tube is fully enclosed to avoid cross-contamination, and the adapter can cool down the liquidnitrogen to achieve a low temperature grinding environment.
Integrated adsorption design, dewpoint temperature is reduced by 20~ 40 ℃, drying sterilization effect is significant, suitable for 1~ 2 pump head air Compressor, silent and oil-free operation.
With a diaMeter of 0.75mm and a radius of 0.375mm, the test head meets Bosch and Volvo standards and provides accurate scratch hardness testing.
Processing capacity range of 100~ 5000ml, maximum processing viscosity of 5000CP, suitable for a variety of Sample Handling needs, cutter head design to optimize the homogenization effect.
The number of teeth is 11, the spacing is 1mm, and the single-sided simple cutter head design can be used for cross-cutting experiments. Standard two cutter heads are provided for easy operation.
11 tooth cutter design, 2mm pitch, single-sided simple cutter head, can carry out cross-cut experiment, test coating adhesion, in line with a number of international standards.
The test head has a diaMeter of 1.0mm and a spherical radius of 0.5mm, which meets the Opel, Volvo, van Laar industry standards and can accurately evaluate the scratch resistance of coatings.
Equipped with 6 teeth 2mm pitch stainless steel cutter head, adjustable cutter head angle, suitable for 61-120μm film thickness test, with nylon brush and 2.5x magnifying glass, to meet a variety of international standards.
The processing capacity range is 150-13000ml, the maximum processing viscosity is 7000CP, and the maximum linear speed of the rotor is 26m/s. It is suitable for high viscosity materials, and the working head is made of corrosion-resistant materials.
Double measurement head structure design, Measurement range 0~ 10N, resolution 0.01N, automatic test to avoid human error, built-in tray automatic lifting to improve efficiency.
Single person single-sided vertical quasi-closed structure effectively prevents external gas induction, adjustable air volume system maintains 0.25~ 0.6m/s wind speed, equipped with double suspended Glass doors and convenient maintenance design.
Double measurement head structure design, Measurement range 0~ 20N, Indication Error +/- 1%, automatic electronic test, one key operation to avoid human error, built-in tray automatic lifting function.
The single-arm double-column structure is used to realize the free drop of the face corner, and the height tracking system is equipped to make the drop height error not exceed 2%. The buffer device improves the service life and safety of the equipment.
Double head design can process two samples simultaneously, stirring speed of 2400rpm, Temperature range from room temperature to 100 ℃, suitable for stable mixing and heating of small volume solutions.
