Adopt servo electric printing pressure system, printing pressure 0-4mm automatic adjustment, printing speed 0-100 Meters can be set, support low accuracy overprint, simulate Gravure Printing drawdown blade Installation method, easy to detect inks.
The printing speed is 0~ 260m/min, the accuracy is less than 0.5, which supports data management and characteristic detection, and can reduce the number of proofing and material waste.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
The printing pressure can be adjusted accurately according to the thickness of the material, and the printing speed can be adjusted. It provides 4 primary color areas and 4 light color areas to ensure that the pattern is clear and tidy.
Adapt to a variety of Viscometer use, suitable for factory field applications, real-time printing measurement results, no need to hand copy, easy operation, can save labor time.
Measurement range 3μg to 150mg, quick results in one minute, automatic electrolysis current control and thermal printing function.
It can be used with a full range of Viscometers, supports printing test data and Linear dispersion, and realizes data recording and output functions.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
Using 220LPI line number stainless steel anilox roller, printing surface width 70mm, mesh shape is quadrilateral pyramid, wet film thickness is inversely proportional to the number of lines, suitable for proofing of different inks.
Application width 300mm, Spreader accuracy +/- 0.005mm, Drawdown blade can be quickly disassembled and cleaned, three independent temperature control oven to ensure uniform drying, suitable for a variety of substrates and Stock processing.
Using thermal printing technology, it is designed for use with testing instruments. It can directly connect the color difference Meter and Glossmeter to achieve real-time output of measurement data and report generation.
Adopt variable frequency motor control to achieve 50 +/- 5mm/min compression speed, equipped with thermal printer to achieve high-speed silent printing, effective Travel up to 400mm and platen spacing can be arbitrarily set 0-500mm.
Using dip coating process with double roll extrusion residual material, Spreader thickness adjustable, mechanical speed 0.1-1 m/min, Oven temperature 50-150 ℃ +/- 3 ℃, suitable for a variety of Coating Spreader.
Equipped with 8 Meters Oven, roller heating temperature up to 200 ℃, effective application width 500mm, Spreader thickness range 0.005-3mm, support automatic unwinding to winding process, suitable for hot-melt adhesive film.
Support 0-3000um Coating thickness adjustment, travel speed 0-5m/min, Oven temperature 40-150 ℃; Modular head can switch extrusion, Drawdown blade and other Spreader functions, integrated tension closed-loop control and infrared drying options.
