Experimental Analysis Ultra-pure Water Machine

The experimental analysis ultrapure water machine removes particulate impurities through pretreatment, then eliminates dissolved salts via reverse osmosis and ion exchange, and finally uses ultraviolet light or ultrafiltration to eradicate microorganisms and organic matter. It produces water with a resistivity of 18.2 megohm·centimeters, which is used for laboratory reagent preparation, instrument cleaning, and precision analysis to avoid interference from impurities affecting the results.
Selection
When selecting an experimental analytical ultrapure water system, consider water usage requirements such as the type of analysis and daily consumption, and match the water resistivity and total organic carbon (TOC) specifications. Check the quality of the feed water to determine the pre-treatment configuration. Pay attention to the replacement cycle and cost of consumables to ensure easy maintenance. Verify that the equipment dimensions are compatible with the available laboratory space.

Terms

Standards

Instruments

With 18.2MΩ · cm ultra-pure water output and 10L/H water pRoduction capacity, 7-inch touch screen real-time display of water quality paraMeters, support for automatic circulation and consumables reminders, improve experimental efficiency and water quality Reliability.

$ 3491.00

With 18.25MΩ · cm ultra-pure water output and 20L/H water pRoduction capacity, 7-inch color touch screen to achieve animation control, support for water inlet, RO water, UP water three-way water quality online monitoring and automatic reminder of consumables.

$ 3753.00

Equipped with 18.25MΩ · cm ultra-pure water quality and 100L/H water pRoduction capacity, 7-inch color touchscreen displays three-way water quality and temperature in real time, supports consumables failure reminder and automatic circulation system to ensure stable water quality.

$ 5195.00

The eight-stage deep purification system ensures that the water quality is pure, the resistivity of the pRoduced water is 18.25MΩ .cm, and it is equipped with an intelligent Control system to realize automatic monitoring and a variety of water intake modes to meet the strict experimental requirements.

$ 4511.00

With 80L/H water pRoduction capacity and 18.2MΩ · cm ultra-pure water quality, it supports regular automatic circulation and consumable life monitoring. It can disinfect and display three-way water quality with one click, prolong the service life of the ultra-pure water bag, and achieve efficient online monitoring.

$ 2834.00

7-Inch color touch screen control, three-way water quality online monitoring of incoming water, RO water, and UP water, with a water pRoduction capacity of 60L/H, an effluent resistivity greater than 18.25MΩ · cm, and support for quantitative water intake and one-click disinfection.

$ 4671.00

The 5.1-inch LCD screen displays three-way water quality and temperature in real time, with regular automatic circulation function to maintain water quality stability, water resistivity > 18.2MΩ · cm, support for consumable life setting and remote monitoring.

$ 1629.00

The water pRoduction rate is 10L/h, and the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, providing 18.25MΩ. cm ultra-pure water quality, supporting multiple water intake modes and intelligent control functions.

$ 4027.00

With 40L/H water pRoduction capacity and 18MΩ · cm resistivity ultrapure water output, the 7-inch touchscreen displays three-way water quality and temperature in real time, supports automatic circulation, consumables reminder and disinfection functions, ensuring stable water quality and low bacterial contamination.

$ 4408.00

Equipped with a 5.1-inch LCD screen to monitor water quality in real time, support three-way water quality and temperature display, automatically cycle to prolong the life of consumables, set the use time of consumables and remind, and one-click disinfection function to reduce bacterial contamination.

$ 1498.00

The double water outlet design can provide both UP and RO water simultaneously, with a water pRoduction capacity of 20L/H, a fully enclosed pipeline to maintain stable water quality, automatic timing flushing and water shortage protection functions, and quiet operation with noise below 40 decibels.

$ 829.00

With 18.2 MΩ · cm high resistivity effluent, micro particulate matter (PM) less than 1/ml, support automatic circulation and consumable life management, 5.1 inch large screen real-time display of water quality paraMeters, optional disinfection function.

$ 2468.00

The water pRoduction rate reaches 5L/h, the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, the desalination and sterilization rate is over 99%, supports intelligent control and a variety of water intake modes, suitable for laboratory environment use.

$ 3543.00

With 40L/H water pRoduction capacity and 18.2MΩ · cm resistivity, 5.1-inch large screen real-time display of water quality, automatic circulation and disinfection system to extend the life of consumables, support regular quantitative water intake, all-plastic shell rust-proof and durable.

$ 2205.00

Equipped with 80L/H water pRoduction capacity and 18MΩ · cm resistivity effluent, 7-inch color touchscreen displays water quality and temperature in real time, supports automatic circulation and consumable reminders, is compatible with a variety of water storage methods, and has built-in disinfection function.

$ 4932.00

Articles

Determination of Thermal Decomposition Temperature and Inorganic Filler Content in Ink by Thermogravimetric Analyzer
This article introduces how to determine the thermal decomposition temperature and inorganic filler content of ink using a thermogravimetric analyzer. During the test, a small amount of ink sample is heated in a nitrogen or air atmosphere, and the mass change curve is recorded.
Cost-performance analysis of single-channel versus multi-channel switching modules when selecting a laboratory ion meter.
This article compares the cost-effectiveness of single-channel and multi-channel switching modules for laboratory ion meters. Single-channel devices have lower purchase costs, but additional instruments are required for each additional detection parameter. Multi-channel units have higher initial investment, but when testing more than three parameters, the total cost over three years is lower and the sample throughput is greater.
Constant temperature bath selection: circulation method and temperature control range.
This article on thermostatic bath selection primarily analyzes two core factors: circulation mode and temperature control range. The circulation mode is divided into natural convection and forced circulation, where the former is suitable for simple static experiments, while the latter offers higher precision and is better suited for multiple samples or integration with external devices.
Flexographic proofing press is used for evaluating the printability of water-based inks on kraft paper.
This article explores the use of flexographic proofing printability testers to evaluate the printing performance of water-based inks on kraft paper. The instrument simulates actual printing conditions, enabling quantitative analysis of key parameters such as ink transfer rate, print contrast, and dot gain.
Sensitivity Enhancement of Dark Box UV Analyzers in Thin-Layer Chromatography Fluorescence Detection
This article explores how to enhance the sensitivity of dark box ultraviolet analyzers in fluorescence detection for thin-layer chromatography. Sensitivity is influenced by factors such as light source stability, wavelength accuracy, sample background, and ambient light.
Melt flow index instrument controls the flowability and stability of polypropylene injection molding process.
This article explores how to assess and regulate the stability of polypropylene's flowability in injection molding processes by measuring its melt flow rate. It explains the principles behind characterizing flowability and analyzes the impact of factors such as material batch variations and process parameters on stability.
Thermogravimetric Analyzer for Measuring Moisture and Volatiles in Polymer Materials
Thermogravimetric analyzers determine the moisture and volatile content in polymer materials by measuring the mass changes during the heating process.
Differential Scanning Calorimetry measures the phase transition temperature of liquid crystal polymers.
This article introduces the method of determining the phase transition temperature of liquid crystal polymers using a differential scanning calorimeter. The differential scanning calorimeter analyzes the phase transition behavior of materials by comparing the heat difference between the sample and a reference material, recording the heat flow curve during temperature changes.
Differential Scanning Calorimetry for Measuring the Degree of Cure of Polymer Optical Waveguide Materials
This article introduces a method for determining the degree of curing in polymer optical waveguide materials using a differential scanning calorimeter. The degree of curing is a key indicator affecting material performance, and this instrument quantitatively analyzes it by measuring the thermal effects during the curing reaction.
Quantitative Measurement of Carbon Black Content in Rubber by Thermogravimetric Analyzer
Thermogravimetric analyzers measure changes in sample mass through programmed temperature control, enabling the quantitative determination of carbon black content in rubber. During the experiment, the rubber is first heated in an inert atmosphere to decompose it, leaving the carbon black intact. The atmosphere is then switched to an oxidizing environment to oxidize the carbon black. The carbon black content is calculated based on the mass loss.
Thermogravimetric Analyzer Measures Thermal Stability of Plastic Films
This article introduces how to test the thermal stability of plastic films using a thermogravimetric analyzer. It first explains the fundamental principle of the instrument, which assesses the thermal properties of materials by measuring changes in sample mass as a function of temperature.
DSC analyzer measures the glass transition of degradable films.
This article explains how to use a differential scanning calorimeter to measure the glass transition temperature of a degradable film. It first clarifies that the glass transition is the process by which a material changes from a glassy state to a highly elastic state, which appears as a baseline shift on the curve.
Differential Scanning Calorimetry for Measuring the Melting Temperature of Thin Films
Differential scanning calorimetry analyzes thermal transitions in materials by measuring the heat flow difference between the sample and a reference. When determining the melting temperature of thin films, the sample must be uniformly prepared, with a mass between 3 and 10 milligrams. Testing is typically conducted at heating rates ranging from 5 to 20°C/min under a nitrogen protective atmosphere.
The coating machine applies planar optical waveguide cladding material to the surface of optical fibers.
This article introduces the technique of using a coating machine to apply planar optical waveguide cladding materials onto the surface of optical fibers. It analyzes the characteristics of the cladding materials, such as viscosity and surface tension, and their impact on coating quality.
Differential scanning calorimetry for determining the glass transition temperature of epoxy resin
Differential scanning calorimetry analyzes the thermal properties of materials by measuring the heat flow difference between the sample and a reference material.