Electric Pump with double oil path plunger, high voltage 63MPa, Measurement accuracy +/- 1.5%, Peak hold and Data storage function, Hollow structure is convenient for anchor cable detection and operation.
A set of 8 different specifications of anchors, covering the diaMeter range of Φ 6 to Φ 20, is specially designed for bolt pullers to meet a variety of testing requirements.
Hollow self-resetting structure, maximum pulling force 10kN, piston Travel 25mm, with 100 data storage and peak hold function, compact and portable structure.
With 1000KN Measurement range and 50mm displacement detection capability, it can simultaneously monitor tensile displacement temperature paraMeters, support 1000 Data storage and USB Communication interface, and adopt overload protection structure to ensure safe use.
Each set contains 8 different sizes of anchors, covering a diaMeter range of Φ 6 to Φ 25, designed for the RJ-20 bolt puller to ensure test compatibility and accuracy.
Measurement range 0-100KN, automatic reset design, equipped with dust-proof system and import sealing ring, digital display with backlight lighting and 10-segment polyline correction function.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
The blade width is 100mm and the height is 60mm, and the Rod length is 300mm, generating tangential flow and high shear rate to prevent medium deposition, making it suitable for low-speed stirring.
When running at low speed, a tangential flow is generated, and the edge forms a high shear rate. The blade width is 70mm and the Rod length is 350mm, which effectively prevents the deposition of media and is suitable for medium and high viscosity fluids.
Four-blade structure design, blade width 70mm, Rod length 300mm, low-speed operation to pRoduce tangential flow, the edge of the formation of high shear rate, effectively prevent media deposition, suitable for high viscosity fluid mixing.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
When stirring, a tangential flow is generated, and a high shear rate is formed at the edge to prevent medium deposition. The blade width is 100mm and the height is 60mm, and the Rod diaMeter is 8mm, which is suitable for low-speed and mild stirring.
Low-speed stirring pRoduces tangential flow, the edge forms a high shear rate, preventing the medium from depositing the container wall, suitable for polymer reaction and mineral dispersion, the blade width is 70mm, and the Rod length is 500mm.
Low-speed stirring pRoduces tangential flow, the edge forms a high shear rate, the blade width is 90mm, and the Rod length is 650mm, which is suitable for polymer reaction and mineral dispersion to prevent medium deposition.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
