The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
Using rigid polyester plate with foam rubber cushion, size 240x340mm, can absorb operating pressure, improve proofing Repeatability and uniformity, suitable for a variety of substrate testing.
Adapted to NS series ColoriMeter, it can measure liquid, sauce and powder samples, realize color data collection of various forms of materials, and expand the application range of the instrument.
The total film width of 90mm is divided into 10 gaps, the depth is gradually increased by 25μm, and the spacing is 1.5mm. The removable guide plate design is easy to operate on different thickness test panels.
The test bending angle is less than 45 degrees, suitable for steel plate thickness 0.5~ 1.0mm and Aluminum Panel thickness 0.5~ 2.0mm. The gear pair and crank lifting mechanism are used to achieve T-shaped bending, which is easy to operate.
The minimum measurable inner diaMeter is 10mm, the maximum sample thickness is 6mm, and the imported special steel crimp and high-strength pointer components are used. It has good Stability and portability and supports Hardness value conversion.
Using brushless DC motor to achieve stepless speed regulation of 0~ 2000rpm, aluminum alloy heating plate Power 600W rises rapidly, temperature control accuracy +/- 1 ℃, heating plate temperature can be directly set and with safety restrictions.
Designed with 90mm application width and 25μm Graduation, with removable guide plate to ensure direct stretching, the sagging index is assessed through 10 aliquots, meeting ASTM standards.
Using electric pressure system, the printing pressure is adjustable from 0 to 2mm, the speed range is 0 to 80 Meters, low accuracy overprinting is supported, and the computer program control operation is stable.
Four-speed proofing speed is optional, up to 45m/min, using flat engraving plate for direct printing, supporting 95 × 149mm concave sample range, suitable for fast proofing of flexible substrates.
Grinding hard chrome metal pressure plate, adjustable temperature range -10~ 80 ℃, equipped with 10 point temperature transducer, through drying air flow to prevent condensation, ensure test repeatability, in line with a number of international standards.
Using electromagnetic force equilibrating Sensor, accuracy of 0.01mN/m, support platinum plate and platinum ring method, automatic measurement without calculation, real-time display Linear dispersion and save the results.
Equipped with 0.4ml × 96 well coagulation plate, Oscillation Frequency from start to 3000rpm, swing amplitude 6mm, support timing function, suitable for uniform mixing of trace samples.
Using D/8 lighting system, Inter-instrument Agreement Delta E * 00 < 0.2, equipped with non-contact automatic whiteboard calibration technology to ensure measurement accuracy, lithium battery supports 12,000 consecutive tests.
