The double-axis constant force lifting system is easy to operate, the speed range is 0-2800rpm, the diaMeter of the sand grinding disc is 60mm, the structure of the jacketed barrel is stable, and the brushless design is environmentally friendly and durable.
Simultaneous measurement of wind speed, wind temperature, wave height and air volume, equipped with 24 sets of data storage functions, sampling rate of about 1 second, low friction bearing impeller Sensor to ensure measurement accuracy.
Double axis constant force lifting system is easy to operate, speed range 0-2800rpm, grinding disc diaMeter 60mm, jacketed barrel design, brushless mechanical abrasion environmental protection and durability.
With A/C/F three Frequency weighting and fast time weighting, support four Measurement paraMeters, Measurement range 30-130dB, accuracy 1dB, can store 30 sets of data and equipped with USB/RS-232/Bluetooth Communication interface.
With needle and inductive two measurement modes, the measurement range is 0-80% and 0-70% respectively, accuracy +/- (0.5% n + 0.5), support USB, RS-232 and Bluetooth multiple data interfaces, equipped with color coded LED real-time display moisture status.
Heat and corrosion resistant material, can digest 25 samples at the same time, Temperature Stability up to +/- 0.5 ℃, support 0-180 minutes timing and continuous digestion, with overheating protection and temperature alarm function.
With three frequency weighting and four measurement modes, the measurement range is 30-130dB, the accuracy is 1dB, and the built-in 30 data storage functions support USB and Bluetooth data transmission.
It can simultaneously measure 6 paraMeters such as wind speed, wind temperature and wind direction, equipped with 24 sets of Data storage functions, adopts ultra-low friction bearings to ensure High Accuracy measurement, and supports USB and Bluetooth data transmission methods.
Simultaneous measurement of wind speed, wind temperature, wave height, wind level and air volume, equipped with low friction bearing impeller Sensor to ensure +/- 2% accuracy, support 24 data storage and USB/Bluetooth communication methods.
Equipment set stirring, sand grinding, dispersing multi-function in one, using dual-axis constant force automatic lifting system, lifting Travel 250mm, speed range 0-2800rpm, with small size, low noise, no carbon brush abrasion characteristics.
Can collect 4~ 20mA signal or RS485 communication input, integrated sound and light alarm and provide relay control port, Operating temperature range -20~ 50 ℃, support passive relay output full load Power 1KW.
Support dual 4-20mA/RS485 signal input, integrated sound and light alarm and relay control, operation temperature range -10~ 50 ℃, can be connected to a variety of gas Detectors to achieve on-site detection and linkage control.
Maximum load 0.5KN, multi-function design, can be adapted to a variety of Force Gauge, providing stable clamping force, suitable for precision test environment.
Support four 4-20mA or RS485 signal input, integrated sound and light alarm and relay control, operation temperature range -10~ 50 ℃, power consumption is less than 10W, suitable for a variety of Gas detection scenarios.
The independent control of the dual temperature zone can simultaneously digest different paraMeters, the 30-hole design supports digestion capacity above 12mL, the temperature control accuracy is +/- 0.5 ° C, the temperature is raised to 165 ° C within 12 minutes, and the fully enclosed transparent protective cover ensures safety.
