Overview
The LANDTEK AM-4836C Multifunctional Anemometer is a Portable instrument that integrates wind speed, wind temperature, wave height, wind level, air volume and wind direction measurement. It is widely used in the fields of data collection and environment monitoring.
Features
1. Not only can the wind speed be measured, but also the wind temperature, wave height, wind level, air volume and wind direction can be measured.
2. Measurement unit conversion.
3. Sensitivity and accurate measurement, Sensor uses ultra-low friction bearings.
4. Wind speed measurement handle can be separated from the fuselage, convenient measurement.
5. With MAX Maximum Hold function.
6. With storage function, it can store 24 sets of data.
7. You can set the automatic shutdown function by yourself (adjustable from 0 to 9 minutes).
8. Use USB data cable output, RS-232C data cable and software to communicate with PC.
9. Optional Bluetooth ™ data output options are also available.
Principle
Sensor measurement of wind speed through 3 cups, low friction direction pointer to detect wind direction, thermistor sensing temperature, Sampling rate of about 1 second, to achieve Multi-Parameter data collection and storage.
Applications
Boiler, cooling, HVAC, ventilated piping, environment monitoring, nautical measurement data collection, weather forecasting, field operations, fire department data collection
Steps
1. Install 4 AA batteries.
2. Connect the wind speed measurement handle as needed.
3. Select Measurement unit and function settings.
4. Perform data measurement and storage.
5. Use USB, RS-232C or Bluetooth to communicate with your PC.
Notice
* Temperature range from 0 to 50 ° C (32 to 122 ° F).
* The relative humidity should be less than 80% RH.
Make sure the Sensor is clean to avoid affecting Measurement accuracy.
Regularly check the battery level to prevent data loss.
When using the optional Bluetooth function, confirm device compatibility.
