Disperse emulsification homogeneous mixing under vacuum or pressure environment, processing viscosity up to 10000MPas, Operating temperature 170 ℃, equipped with a variety of sensing systems Measuring temperature, pressure, viscosity and other paraMeters, observing the reaction process through Glass kettle.
Equipped with 2500W Ultrasonic Power and 20KHz Frequency, it supports automatic Power regulation and pulse control, and can perform homogeneous emulsification and stirring operations at the same time. Glass Reaction Kettle is resistant to corrosion and has a processing capacity of 10L.
Temperature range -20~ 100 ℃, cooling capacity 1200W, support high temperature direct drop technology, built-in pressure suction pump can withstand high temperature work of 80~ 300 ℃, with low liquid level protection and a variety of safety protection functions.
Using PTFE lining acid and alkali resistance, the sealing effect is stable for a long time without leakage, the maximum pressure is 6Mpa, the maximum temperature is 240 ℃, and the small size is convenient for multiple Reaction Kettles to operate at the same time.
High borosilicate Glass material, corrosion resistance and high and low temperature resistance, strong ability to withstand thermal Impact; vacuum negative pressure can reach 0.095MPa, support material reaction under negative pressure; Overhead Stirrer Rotation speed 50-500rpm, torque 70N.cm, suitable for a variety of viscosity materials.
Using high borosilicate Glass material, corrosion resistance and can withstand -80~ 200 ℃ Operating temperature, vacuum negative pressure of 0.095MPa, equipped with PTFE four-leaf stirringRod and RWD50 top Stirrer, Speed range 50~ 500rpm, support precise control and uniform material reaction.
Adopt proportional refrigeration technology and high temperature direct drop technology, temperature fluctuation +/- 0.1 ℃, pump maximum Flow rate 22L/min, support short time idling and low liquid level protection, long service life.
The equipment operates under vacuum or pressure conditions, with a processing viscosity of 10000MPas, Operating temperature of 170 ° C, equipped with anchor type screw scraping wall stirring slurry and high shear homogeneous Mulser, supporting Multi-ParaMeter measurement such as material temperature and pressure.
With 4000W Ultrasonic Power and 50L processing capacity, it supports simultaneous operation of ultrasonic processing and mechanical stirring. It is made of high borosilicate Glass to withstand heat Impact and can store 20 sets of operating procedures.
With 20-25KHz Ultrasonic Frequency and 1800W Maximum Power, it supports ultrasonic, homogeneous emulsification and vortex mixing operation at the same time, provides over-temperature overload alarm and remote control function, Glass parts are resistant to corrosion and high and low temperature.
Equipped with 3500W Ultrasonic Power and 20L processing capacity, support ultrasonic emulsification and mechanical mixing synchronous operation, high borosilicate Glass material to withstand thermal Impact, horn with automatic Power adjustment function.
High borosilicate Glass material, corrosion resistance and can withstand large thermal Impact, vacuum negative pressure of 0.095MPa, Speed range 50~ 500rpm, suitable for material synthesis and distillation recovery.
Adopt non-heat centrifugal circulation pump to avoid its own heat generation affecting the temperature field, Temperature Uniformity of +/- 0.05 ℃, support 200 degrees high temperature direct start cooling without damaging the Compressor, equipped with 13L/min external circulation Flow rate.
Temperature range covers -50 to 200 ° C, supports 200 ° C direct start cooling without damaging the Compressor; uses a heat-free centrifugal circulation pump and U-shaped return design to ensure Temperature Uniformity +/- 0.05 ° C; provides a variety of Safety protection such as low water level and temperature runaway alarm.
Double Compressor cascade refrigeration system is used to achieve rapid cooling, Tank volume 6L with 8L/min pump Flow rate to ensure liquid uniformity, Temperature Fluctuation control within +/- 0.05 ℃, Precision Pt100 Sensor to ensure long-term stable operation.
