Low-speed running torque output of 94N.cm, using multi-stage Non-metallic gear transmission force, stable running state and low noise, stepless speed range of 100~ 1400rpm, suitable for a variety of Impeller and containers.
The blade width is 100mm and the height is 60mm, and the Rod length is 300mm, generating tangential flow and high shear rate to prevent medium deposition, making it suitable for low-speed stirring.
When stirring, a tangential flow is generated, and a high shear rate is formed at the edge to prevent medium deposition. The blade width is 100mm and the height is 60mm, and the Rod diaMeter is 8mm, which is suitable for low-speed and mild stirring.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
Three cutting methods are available, with a maximum cutting diaMeter of 30mm. It is equipped with a 7-inch Touchscreen and a fully enclosed safety protection structure. The work surface is made of stainless steel, and fast clamps and vertical clamps are provided to meet different sample clamping needs.
The equipment supports 0.5-20 liters of barrel paint mixing, revolution speed 100-200rpm, rotation speed 200-400rpm, using multi-stage intelligent frequency conversion speed regulation and door opening and shutdown protection to achieve smooth operation and safe operation.
Using stepless speed regulation technology, Speed range 0~ 2800rpm, turnover diaMeter 4mm, support point and continuous Operating Mode, high performance motor to ensure rapid mixing and low noise.
Adopting stepless speed regulation technology, the maximum speed is 2800RPM, the eccentric spherical shaft design is easy to install, the TPU countertop is wear-resistant and corrosion-resistant, compact in size and low in noise, suitable for high-speed mixing operations.
Using series micro motor and multi-stage Non-metallic gear drive, Max. Torque reaches 94N.cm, Speed range 100-1400rpm, stable operation, low noise and support for a variety of Impeller adaptations.
The series micro motor provides 94N.cm Max. Torque, multi-stage Non-metallic gear drive to achieve torque doubling, support 100-1400rpm stepless speed regulation and 28L Processing capacity, stable operation and low noise.
Rotation speed 3000rpm, maximum linear speed 33m/s, high dispersion efficiency, strong material shear force, the formation of uniform suspension effect, safe and convenient operation, electric lifting fast fixed sealing barrel.
Adopting stepless speed regulation technology, the maximum speed reaches 2800RPM, and the eccentric spherical shaft design ensures uniform mixing; the body adopts reinforced engineering plastics, and the work surface is made of wear-resistant TPU material, which is acid-alkali and collision-resistant, suitable for high-speed work.
Vacuum sealing defoaming effect, Rotation speed up to 3000rpm, linear speed up to 33m/s, electric lifting operation is convenient, high dispersion efficiency, suitable for viscosity ≤ 25000cps materials.
Fixed speed 2800RPM, eccentric spherical shaft design to ensure uniform mixing; TPU material work surface wear-resistant and corrosion-resistant, suitable for a variety of testtube specifications; compact size and low power consumption, suitable for long-term high-speed work.
