Suitable for a variety of Corrugated Board adhesive strength test, equipped with different specifications of steel needles, needle diaMeter range 1.0-3 mm, support A, B, C, E corrugated test, sample size 25 × 80mm.
The fixture can fix the upper and lower ends of the butterfly specimen into a vertical shape, test the vertical compression strength, suitable for a variety of Corrugated Board types, Dimension 150 * 105 * 65mm, weight about 2Kg, easy to operate.
Can cut 25 * 100mm sample, sampling error +/- 0.5mm, sampling thickness range of 18mm, fast and accurate completion of Corrugated Board Edge Crush Test and adhesive strength test sample preparation.
Thrust sampling mode, cutting edge pressure sample 25mmx100mm and gluing sample 25mmx80mm, sampling thickness range of 18mm, suitable for Corrugated Board and carton mass detection.
Equipped with A/B/C/E four kinds of corrugated pins, the diaMeter of the pins is Φ 2-3mm, the straight line is arranged without bending, and the unit length Corrugated Board gluing line can be separated to meet the testing needs of different sizes of paper pRoducts.
It can cut 32.2cm ² and 64.5cm ² samples, the sampling error is less than 0.5cm ², and the maximum sampling thickness is 15mm, which meets the accurate sampling requirements of Corrugated Board Flat Crush Test.
Equipped with long and short pin holders and Φ 3mm and Φ 2mm pins, the pin axis is less than 1/100 after the parallelism error combination to the bottom surface, and less than 1/200 when the force is 300N, making it easy to operate without adjustment.
5-Inch color Touchscreen is easy to operate, Measurement range 0-48J covers a variety of gears, equipped with thermal printer and RS232 interface, steel structure design reduces test vibration energy loss.
The imported sliding track is used with the blade to cut multi-layer Cardboard samples, the sampling size error is +/- 0.5mm, the sampling thickness range is 18mm, the scale laser engraving is clear and wear-resistant, and the strong magnet is convenient for blade installation.
Maximum load 50Kg, Test speed 10~ 60mm/min adjustable, using pointer sensing mode, effective Travel 0~ 360mm, suitable for vertical angle disbonding test.
The linear guide is used to ensure smooth and fast sampling, and the imported tungsten sheet is cut without burrs and durable. It supports 18mm thickness sampling, and can cut 25 × 100mm and 25 × 80mm samples.
Measurement range 1~ 48J, accuracy up to +/- 0.05J, with intelligent judgment and data saving functions, the cone size of 60mm to ensure test Reliability.
Using Taiwan SDI blade and Japan SK4 high carbon steel material, sharp and durable; sampling accuracy +/- 0.5mm, thickness range ≤ 10mm; novel design, flexible sampling standardization, less burrs.
Using energy conversion principle design, triangular prism angular cone piercing head, measurement range 0-48J, resolution 0.01J, with automatic measurement and data storage functions, reliable safety protection.
Adopt stepper motor to achieve stepless speed regulation of 1~ 500mm/min, equipped with 500N force value Measurement range and +/- 1% accuracy level, with overload protection and limit protection functions, stable and reliable operation.
