Portable HydroMeter

The portable liquid densitometer is based on Archimedes' buoyancy principle, which calculates the density value by measuring the buoyant force exerted by the liquid on a float. It is used for on-site rapid testing of the concentration or purity of liquids such as coatings and inks, making it suitable for production process control and raw material acceptance.
Selection
When selecting, pay attention to whether the measurement range and accuracy match the characteristics of the liquid to be measured, and consider the temperature compensation function to adapt to the on-site environment. Check the corrosion resistance of the instrument's materials, ensure the operation interface is simple, the calibration method is convenient, and guarantee stable and reliable data.

Terms

Standards

Instruments

Intelligent storage calibrated value, no need to calibrate frequently; Compact and portable, one-handed operation; accuracy up to 1%, Repeatability 0.2%; Long life Illuminant, Good Stability; Built-in rechargeable battery, can be used for a long time.

$ 351.00

High Accuracy opticalin strument designed with refraction principle, compact and portable can be put into the pocket, LCD large screen 3 seconds fast display, automatic temperature compensation function, more than 10,000 times of use, with automatic shutdown and power alarm function.

$ 251.00

LED Illuminant to achieve 0~ 100% measurement range, accuracy of +/- 2%, support wireless operation and USB/Bluetooth data output, rugged and portable structure, in line with a number of international test standards.

$ 320.00

Polarographic Laminating ElectRode, Measurement range 0.0~ 20.0mg/L, Response Time ≤ 30 seconds, automatic temperature compensation 0~ 40 ℃, portable design for outdoor use.

$ 225.00

Measurement range 0.00~ 14.00, accuracy +/- 0.05, Stability +/- 0.03, support 0~ 60 ℃ temperature compensation, portable and lightweight only 205g, suitable for a variety of environments.

$ 156.00

Simultaneous measurement of pH, calcium ion, nitrate and other paraMeters, accuracy +/- 0.2 pH, Portable design to adapt to the marine environment, automatic recording of 200 sets of data, Protection Rating IP67.

$ 767.00

Measurement range 0-150 seconds, copper material is durable and in line with national standards, portable design is convenient for on-site rapid detection of Coating viscosity.

$ 123.00

Portable photoelectric combination design, Measurement range 0~ 199.9GS, projection angle 20º, 60º, 85ºoptional, Stability less than +/- 0.4GS/30min, suitable for a variety of flat material Glossiness detection.

$ 364.00

Measurement range 1~ 200,000Lux, accuracy +/- 5%, automatic range switching, Sampling rate 2 times/second, lightweight and portable only 80g, suitable for fast light detection.

$ 81.00

Measurement range 0.00-14 pH, accuracy +/- 0.05pH, with temperature compensation function, portable design for easy field use, large screen LCD display is clear and intuitive.

$ 114.00

Measurement range 0.00-14 pH, accuracy +/- 0.05pH, with automatic temperature compensation function, portable design for on-site fast detection, repeatability error only +/- 0.03.

$ 105.00

Portable design, compact size, accuracy of +/- 1%, with peak hold and real-time load switching function, dual unit display without conversion, Maximum Measured value 50kg.

$ 136.00

The portable design is battery-powered and supports UV, visible and infrared light transmitance measurements with +/- 2% Accuracy and swirl/spin Sensor for multi-angle testing.

$ 419.00

Portable three-angle design covers 20 °, 60 °, 85 ° Measurement range, automatic conversion specular gloss mode, Repeatability 0.2GU, built-in statistical evaluation and RS232 interface, support multi-language operation.

$ 5560.00

Designed with refraction principle, 3 seconds fast display results, automatic temperature compensation function, Measurement accuracy +/- 0.2Brix, more than 10,000 times of use, compact and portable can be put into the pocket.

$ 251.00

Articles

Lab Mixer Selection - Viscosity Determines Torque
This article mainly discusses how to select a laboratory mixer based on the viscosity of the material. The higher the viscosity, the greater the torque required. Low-viscosity liquids are suitable for high speed and low torque, while high-viscosity materials require low speed and high torque.
Application of Transparent Constant Temperature Water Bath in Visualization of Material Thermal Deformation
The constant temperature water bath provides a stable environment for observing the deformation of materials after heating by maintaining a constant and uniform temperature of the liquid medium.
Improving Efficiency with Vortex Mixers in Biological Sample Pre-treatment
This article primarily discusses how vortex mixers enhance the efficiency of biological sample pretreatment. By generating a vortex motion through an electric motor, they enable rapid and uniform mixing of liquids, saving time and delivering better results compared to traditional manual methods.
Abbe refractometer measures the relationship between refractive index and concentration of liquid coating resins.
This article introduces the method of measuring the refractive index of liquid coating resins using an Abbe refractometer and calculating the concentration based on the relationship between refractive index and concentration.
Negative pressure method leak detector for testing vacuum packaging seal integrity
The negative pressure leak detector evaluates the seal integrity of vacuum packaging by simulating a pressure differential environment. The instrument places the sample in a testing chamber and creates a vacuum to form negative pressure. If there is a leak, air or liquid will seep into the packaging, and the result is determined by observing pressure changes or the presence of bubbles.
The oral dissolving film is uniformly coated by a film applicator and then dried and formed.
Oral dissolving films are prepared by a coating mechanism, where a liquid containing film-forming materials is uniformly applied onto a substrate, followed by drying to remove the solvent and form a solid film.
Abbe refractometer measures the refractive index and concentration of resin liquids.
The Abbe refractometer measures the refractive index of resin liquids using the principle of the critical angle of light, and there is a corresponding relationship between the refractive index and concentration within a certain range.
Surface Tensiometer Evaluates the Wetting and Spreading Properties of Resin Liquids
This article introduces how to use a surface tensiometer to evaluate the wetting and spreading performance of resin liquids. Wetting and spreading affect the adhesion and appearance of products such as coatings and adhesives, and the process can be described by Young's equation and the spreading coefficient.
Key steps for measuring the efflux time of varnish using a viscosity cup method
This article introduces the method for measuring the outflow time of varnish using a viscosity cup. The principle is based on Poiseuille's law, where viscosity is estimated by recording the time it takes for the liquid to completely flow out from the small hole at the bottom of the cup—longer times typically indicate higher viscosity.
Cobb Absorbency Tester Evaluates Paper Water Absorption Capacity
The Cobb water absorption tester is used to measure the water absorption capacity of paper or cardboard by simulating the liquid contact process and calculating the mass of water absorbed per unit area to determine the Cobb value.
Application of Paper Absorbency Tester in Sizing Process
The paper absorbency tester evaluates the absorption performance of paper by measuring the penetration of liquid on the paper. In the sizing process, sizing agents alter the hydrophilicity of the paper fiber surface, thereby affecting the paper's resistance to liquids.
Water Absorption Tester in the Detection of Tissue Paper and Paperboard
This article introduces the application of water absorption testers in the testing of tissue paper and paperboard. The instrument evaluates the water absorption performance of materials by measuring the mass or height of liquid absorbed by the sample, with common methods including the Klemn method and the capillary rise height method.
The flash point tester measures the safety baseline value of the solvent.
The flash point refers to the minimum temperature at which the vapor of a flammable liquid can be ignited. It is not a fixed value but depends on the testing method and instrument. Data measured by flash point testers serve as a critical basis for evaluating the fire risk of solvents and establishing standards for safe storage and operation.
Density Determination: Selection Strategy between Pycnometer Method and Densimeter Method
This article introduces two methods for measuring the density of substances: the pycnometer method and the densimeter method. The pycnometer method calculates density by measuring the mass of a sample of fixed volume. It is suitable for measuring liquids, powders, and small granular solids, offering high precision but slower operation, and requires temperature control.
Surface Tensiometer: Interpreting the Invisible Forces on Liquid Surfaces
Surface tension is the contractile force generated by the uneven forces acting on molecules at the liquid surface, influencing phenomena such as droplet formation and capillarity. Surface tension meters measure this force using techniques like the Wilhelmy plate method, the platinum ring method, or the pendant drop method. Their core components include force sensors, sample stages, and data processing systems.