With two test stations, the load range is 50~ 1000g, and three typical wear resistance tests of alcohol, eraser and pencil can be carried out, which is suitable for wear resistance evaluation of various coatings and materials.
Double station design can simultaneously carry out two sets of tests, round trip 0-50mm adjustable, test load 80-990g adjustable range, equipped with a variety of weight to meet the wear resistance performance evaluation requirements under different load conditions.
Precise load of 500g ensures test Stability and is suitable for calibrating and testing Wear resistance Testers to improve equipment performance.
Rotation speed 40rpm and roller diaMeter 150mm design, suitable for a variety of resilience material testing, abrasion Travel 40mm, test load optional 5N or 1N, to ensure efficient and accurate wear performance evaluation.
Support 2-wire method and 3-wire method measurement, Ground Voltage Measurement range 0~ 200V, Ground Resistance Measurement range 0~ 199.9 Ω, Response Time about 5 seconds, with continuous measurement function and overload protection, suitable for a variety of grounding system testing.
Equipped with six independent stations and two Lisaru motion trajectories, it supports a maximum of 999999 counts, and adopts a movement speed of 50rpm, which can simultaneously test the wear resistance performance of multiple sets of samples.
303 stainless steel material wear and corrosion resistance, wet film thickness 25.1 μ m, wire-wound structure to ensure uniform film, suitable for a variety of liquid materials.
The equipment is equipped with eight independent stations for simultaneous testing, supporting 24mm and 60.5mm Li Sharu motion trajectories, with a maximum motion range of 60.5mm. It uses a 395g fabric weight and a 2385g pressure clock system to achieve multi-standard material wear resistance evaluation.
Adopt stainless steel corrosion wire-wound, Abrasion Resistance, film thickness 102.9μm, application width 300mm, suitable for laboratory film proofing.
With no-segment adjustable Friction Frequency, speed range of 60 times/minute, support 10-50mm friction distance free adjustment, mirror stainless steel material, provide a variety of clamping and wear mode, power failure memory function to ensure test continuity.
Four-terminal Resistance Measuring method is used to eliminate the influence of wire resistance, test Precision 0.1% reading + 2 words, Measurement speed is fast 32 times/second, with perfect sorting function, alarm value can be set for percentage sorting, strong anti-interference ability.
Film thickness 100.6μm, application width 30cm, stainless steel material, wear and corrosion resistance, suitable for high viscosity or high abrasion experiments, high accuracy and durability.
4-Terminal Resistance Measuring method is used to eliminate the influence of wire resistance. Test speed is up to 6 times/sec. Measurement current is less than 100mA to prevent temperature drift and ensure Precision and Stability.
The instrument is equipped with an eight-station synchronous test function, which supports 24mm and 60.5mm Li ShaRu motion trajectories, with a maximum motion range of 60.5mm. It meets a variety of standard requirements, is easy to operate, and counts intuitively.
Film Film thickness 48.0μm, Spreader width 300mm, stainless steel material, wear and corrosion resistance, especially suitable for high viscosity or high abrasion experiments, high accuracy and durability.
