The digital display temperature control is accurate and reliable, the hot air circulation system is composed of a high temperature fan and a suitable air duct to improve the Temperature uniformity in the working room, and the heating wire is installed at the bottom to heat up quickly.
Application width 300mm, Spreader accuracy +/- 0.005mm, Drawdown blade can be quickly disassembled and cleaned, three independent temperature control oven to ensure uniform drying, suitable for a variety of substrates and Stock processing.
Ceramic fiber liner and door seal, high temperature and easy to clean; equipped with P.I.D fuzzy logic controller, Temperature Fluctuation +/- 0.5 ℃, support 7 groups of 63 steps programmable operation, circulating fan Rotation speed adjustable to ensure accurate and safe experiments.
The maximum effective temperature is 600 degrees Celsius, which is better than conventional 500-degree equipment; it is equipped with an independent temperature limiter to set the upper temperature limit and double protect high-value materials; the liner is made of thickened 304 stainless steel, which is resistant to high temperature and corrosion.
Ceramic fiber material, high temperature performance, temperature control accuracy of +/- 0.5 ℃, programmable multi-stage control, support 63 steps Program settings, easy to automate complex experiments.
Temperature range Rt + 10~ 200 ℃, Temperature Fluctuation +/- 1 ℃, Equipped with Forced Circulation Convection Channel and High Accuracy Platinum Resistance Sensor to ensure a stable high temperature environment, suitable for Sampling Handling and catalyst activation.
Temperature range up to 500 ℃ and Fluctuation only +/- 1 ℃, equipped with hot air circulation system to ensure Temperature uniformity, support independent temperature limit alarm and RS485 Communication interface to meet the precise temperature control requirements in high temperature environment.
The maximum effective temperature is 600 ° C, which is better than the conventional 500 ° C equipment; it adopts thickened 304 stainless steel liner, which does not deform at high temperature and prevents acid and alkali corrosion; it is equipped with an independent temperature limiter to provide double temperature protection to ensure material safety.
Adopting high-temperature non-alkali fiberglass insulation layer sealing resistance wire, the heating area is large and the temperature rises quickly, the maximum operating temperature is 380 ° C and supports continuous work, and the hemispherical design is not easy to bruise Glass ware.
Adopt thickened 304 stainless steel liner to resist high temperature and corrosion, the maximum effective temperature is 600 ° C, equipped with intelligent PID temperature control to reduce the temperature, support timing and over-temperature alarm, double-decked door insulation and energy saving.
The maximum effective temperature is 600 ° C, which is better than the conventional 500 ° C equipment; it adopts thickened 304 stainless steel liner, which does not deform at high temperature and is resistant to acid and alkali corrosion; it is equipped with an independent temperature limiter to provide double temperature protection to prevent material overheating damage.
The maximum temperature is 600 ° C, which is better than the conventional 500 ° C equipment; it adopts thickened 304 stainless steel liner, which is resistant to high temperature deformation and acid and alkali corrosion; it is equipped with intelligent PID temperature control system, which can reduce the temperature fluctuation by +/- 5%.
Inlet and outlet devices are used to intRoduce inert gas to effectively prevent oxidation and decarburization of high-temperature heating workpieces. The Furnace volume is 16L and the maximum temperature is 1200 ° C. The high-temperature spraying process of the shell is durable.
The thickened 304 stainless steel liner is resistant to high temperature and corrosion, with a maximum effective temperature of 600 ° C, which is better than conventional equipment. It is equipped with an intelligent PID temperature control system to reduce the phenomenon of flushing, and has timing and over-temperature alarm functions to ensure safe operation.
Ceramic fiber material, Temperature range RT + 20~ 400 ℃, liner size 450 × 450 × 450mm, with multi-stage programmable control, independent temperature limit alarm and fast and stable temperature control function, easy to clean and automatic operation.
