Irreversible discoloration records the highest temperature, accuracy +/- 1 ° C to +/- 4 ° C, four-speed temperature monitoring range 104-121 ° C, oil-resistant, water-resistant and steam-resistant, instant Response without power supply.
Irreversible Color change for long-term temperature recording; Resistant to oil, water and steam; Temperature accuracy is +/- 1 ° C below 100 ° C and +/- 1.5 ° C from 100 ° C to 154 ° C; Self-adhesive design for easy use and storage.
Adopting the principle of irreversible discoloration, the accuracy is +/- 1 ° C below 100 ° C, with 6 temperature grids from 65 ° C to 93 ° C, oil, water and steam resistance to ensure stable operation in harsh environments.
Adopt double roll extrusion method to achieve 0.3-10 mm Spreader Film thickness, accuracy of +/- 0.05mm; Equipped with hot air circulation Oven, Temperature range room temperature to 200 ℃ +/- 3 ℃; Tension controller automatically controls the unwinding process to ensure the uniformity of Spreader.
Using roll-to-roll continuous solution pool mode, the width of the substrate is 200mm, and it is dried by 130 ° C hot air Oven; the solution pool can be lifted and heated, and PLC control ensures stable operation, which is suitable for a variety of substrate processing.
Application width 300mm, Spreader accuracy +/- 0.005mm, Drawdown blade can be quickly disassembled and cleaned, three independent temperature control oven to ensure uniform drying, suitable for a variety of substrates and Stock processing.
Temperature control accuracy +/- 0.3 ℃, resolution 0.1 ℃, mirror stainless steel liner for easy cleaning, silicone sealing ring to ensure high sealing, microcomputer controller provides stable and reliable operation.
Microcomputer controller to achieve 0.1 ℃ resolution temperature control, mirror stainless steel liner easy to clean, equipped with silicone sealing ring to ensure the high sealing of the studio, over-temperature alarm function to improve the use of safety.
Mirror stainless steel liner for easy cleaning, Temperature range 5 ℃~ 65 ℃ and Fluctuation +/- 0.3 ℃, microcomputer controller to ensure stable and reliable temperature, silicone sealing ring to ensure high sealing.
Equipped with a heated vacuum bed, the temperature can reach 100 ° C, the coating speed range is 0.1~ 500mm/s, Travel 415mm, supports a variety of film tools, and the intelligent interface simplifies the operation.
The microcomputer controller is used to achieve accurate temperature control, Fluctuation is only +/- 0.3 ℃, Mirror stainless steel liner is easy to clean, Silicone sealing ring ensures high sealing of the studio, liner size 400 × 400 × 500mm.
Using irreversible discoloration technology, accuracy of +/- 1 ℃ to +/- 4 ℃, oil and water resistance, Temperature range 199 ℃ to 232 ℃, providing long-term temperature recording, easy to paste and remove.
Using dip coating process with double roll extrusion residual material, Spreader thickness adjustable, mechanical speed 0.1-1 m/min, Oven temperature 50-150 ℃ +/- 3 ℃, suitable for a variety of Coating Spreader.
Equipped with perforated heated vacuum bed, the temperature can be increased to 100 ° C, the coating speed range is 0.1-500 mm/s, and the bar and Blade Coating methods are supported to ensure uniform film thickness and sample repeatability.
The cuboid studio improves the effective volume utilization rate, temperature control accuracy +/- 1 ℃, drying time is shortened by more than 40% compared with traditional equipment, and can be heated and tested in an oxygen-free or inert gas environment.
