Echo-echo technology implementation of 0.15mm ultra-thin part measurement, resolution of 0.001mm, can penetrate 0.5mm coating measurement substrate Film thickness, support sound speed calibrated and difference mode settings.
Travel 0-1.25 mm, measurement error +/- 1HAM, pressure at the end of the needle 324-764mN, suitable for thin rubber samples with a thickness of 1.5mm or more, and can be used with a fixed load measuring rack.
Travel 0-1.25 mm, measurement error +/- 1HAM, suitable for thin rubber samples with a thickness of 1.5mm or more. Sensitivity is high, and it needs to be used with a constant load measuring rack to ensure Precision.
Using 7.5MHz High Frequency Probe, Measurement range 0.7~ 50mm, suitable for thin-walled and small arc surface workpieces, the lower limit of pipe measurement is Φ 25 * 1.2mm, strong adaptability.
Using clutter flying technology implementation of 0.15mm ultra-thin parts measurement, the highest resolution of 0.001mm, support through coating measurement and Bluetooth communication, with voice broadcast and LED backlight function.
Frequency 10MHz, Measurement range 0.65~ 20mm, suitable for thin-walled and small curved surface workpieces, the lower limit of pipe measurement Φ 10 * 1.0mm.
Using clutter flying technology implementation of ultra-thin parts measurement, minimum Film thickness of 0.15mm, the highest resolution of 0.001mm, with two Measurement modes and through the coating measurement function, equipped with 15MHz single crystal delay probe.
Measurement range 0-20mm, accuracy 0.001mm, contact pressure 20 +/- 5kPa, suitable for paper, Cardboard and sheet material Film thickness detection, in line with a number of international standards.
Measurement range 0~ 12.7mm, resolution up to 0.001mm, contact pressure 20 +/- 0.5Kpa to ensure measurement Stability, suitable for all kinds of sheet material thickness detection.
Measurement range 0.0~ 500μm, error +/- (0.3μm + 2%), ultra-small probe suitable for nails, bolts and other small workpiece thin platings measurement, with multi-point calibrating and statistical functions to ensure high Repeatability and Stability.
Impact energy 3N, Impact device mass 75g, suitable for measurement of small or thin specimens and surface hardening layer, the minimum thickness can be measured 1mm and the minimum hardening layer depth 0.2mm.
Using mechanical measurement method, Measurement range 0~ 1mm, accuracy ≤ 0.005mm, Graduation 0.001mm, probe diaMeter Φ 5mm, suitable for flat film and sheet, providing two probe pressure options.
Measurement range 0-20mm, accuracy of 0.001mm, contact pressure 20 +/- 5kPa, suitable for different tightness of sheet materials, to meet a number of international standards.
Measurement range 0-4mm, contact pressure 100 +/- 10kPa, contact area 200mm ², with High Accuracy Indication Error +/- 0.0025mm, suitable for all kinds of sheet material thickness measurement.
Adopt pressure converter induction, capacity 50kg/cm ², oil feeding speed 175 +/- 5mL/min (Cardboard), automatically complete the pressurization and decompression operation, and automatically retain and print out the test results.
