The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
Support HDMI, WIFI and SD card three output, 1920 * 1080 resolution, can directly control camera paraMeters through USB mouse, embedded image capture and video recording, suitable for a variety of detection scenes.
The equipment performs 180 ° reciprocating folding test at a fixed speed of 87 times/minute, supports a variety of sample sizes (longest 88mm, widest 63mm), the thickness is suitable for materials ≤ 0.5mm, and is equipped with numerical control display to monitor the number of folds in real time.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
Contains 216 Classic Colors, semi-matte surface, full page color sample size 5.0x15.0cm, monochrome design for easy comparison, with U-shaped protective cover for loss prevention.
The minimum measurable inner diaMeter is 10mm, the maximum sample thickness is 6mm, and the imported special steel crimp and high-strength pointer components are used. It has good Stability and portability and supports Hardness value conversion.
Featuring a 20mm large aperture design, it enables uniform measurement of textured and rough surfaces; repeatability ΔE*ab ≤ 0.03 ensures high precision; equipped with a touchscreen and color card matching for convenient operation, supporting multiple color difference formulas and color spaces.
The black and white half design is easy to observe the covering effect, the size is 194 * 260mm to meet the standard test requirements, and the non-Laminating surface ensures the detection accuracy, which is suitable for laboratory film performance evaluation.
The ElectRode is a composite design with a 60mL reference filler and calibrating solution combined with an ionic strength modifier for accurate measurement of Cu Ion concentration and comes with a polishing strip for easy maintenance.
The black and white stripe design is easy to observe the levelling effect, the specification 194x289mm meets the ASTM standard, has excellent solvent resistance and dimensional stability, and does not deform or curl in the humidity environment.
ElectRode composite structure, equipped with 60mL reference filling solution and calibrating solution, built-in ionic strength modifier, support accurate lead Ion concentration measurement, matching polishing strip for easy maintenance.
Using high-power LED Illuminant, Color temperature adjustment range 2300K-8500K, illuminance adjustment range 0-3000LX, life of more than 10,000 hours, uniform irradiation without stroboscopic.
Made of stainless steel, the thickness is only 1.5mm, the range is 20~ 200μm, Division 20μm, the card design is convenient for quick measurement of wet-film Coating thickness on site.
Adopt microcomputer temperature control technology, temperature control accuracy +/- 1% ℃, Vacuum Level < 133pa, equipped with tempered Glass door and silicone sealing strip, support inert gas filling, suitable for rapid drying of complex ingredients.
Microcomputer temperature control technology, Temperature Fluctuation +/- 1%, Vacuum Level < 133Pa, equipped with high temperature silicone rubber sealing strip and tempered Glass door, support inert gas filling, suitable for heat sensitive material drying.
