Using CR12 molybdenum vanadium material to ensure durability, providing 75-600μm multi-film thickness range, double-sided design can complete different thickness Spreader at one time, effective application width 80mm to meet the requirements of standard samples.
Made of hard stainless steel, it is not subject to acid and alkali erosion; the multi-faceted I-shaped design can be scraped with 4 different thicknesses of wet-film, including 100/150/250/300μm, and the operation is simple. Just change the angle.
Made of hard stainless steel, resistant to acid and alkali erosion; multi-faceted I-shaped design can provide 30/60/90/120μm four film thicknesses; application width 160mm, simple operation only need to change the angle to obtain different thicknesses.
Hard stainless steel material corrosion resistance, can be prepared four different thickness wet-film, application width 80mm, operation only need to change the angle can quickly switch film thickness.
Using Ubbelohde DIN size I specification, viscosity measurement range of 2~ 10cst, based on the principle of capillary tubing flow time and viscosity proportional ratio, accurate measurement is achieved.
Dimensions of special-shaped support ring, suitable for HM6560 Leeb Hardness Tester, ensure stable support on complex surfaces, improve Measurement accuracy and applicability.
Stainless steel corrosion resistance, can be prepared four different thickness wet-film, application width 80mm, simple operation only need to change the angle, to ensure that the sample can be compared evenly.
Application width 100mm, wet film thickness 200μm, stainless steel material to ensure corrosion resistance, provide uniform Spreader effect to meet the needs of laboratory testing for precise control of sample thickness.
Using stainless steel material, acid and alkali erosion resistance, can be prepared 50/75/100/150μm four thickness wet-film, application width 80mm, operation only need to change the angle to obtain different film thickness.
Adopting Japanese I15 standard design, the external aperture is 6.0 +/- 0.5mm, and the internal aperture is 3.5 +/- 0.05mm, which can quickly measure Coating viscosity and take the average value of three measurements to ensure accuracy.
K-shaped cogging design, large tooth spacing, suitable for high viscosity Coating, wet film thickness 250μm, leveling well, the bottom of the cogging is wider, suitable for applications with large glue viscosity.
K-shaped cogging structure, large tooth spacing, suitable for high viscosity Coating, wet film thickness 100 μ m, excellent leveling, 304 stainless steel material is durable.
K-shaped cogging bottom design, large tooth spacing, suitable for high viscosity Coating, wet film thickness 300μm, leveling well, suitable for large glue viscosity application scenarios.
K-shaped cogging structure design, large tooth spacing, suitable for high viscosity Coating, wet film thickness 200μm, excellent leveling performance, suitable for glue and other viscous materials Spreader.
K-shaped cogging bottom design, large tooth spacing, suitable for high viscosity Coating, wet film thickness 80 μ m, leveling, suitable for large glue viscosity application scenarios.
