The multi-groove coating scraper can scrape 10 wet-films of different thicknesses at one time, the thickness difference of adjacent films is 25um, and the wide film thickness range of 50-675um is supported. It is convenient to visually observe the sag situation by placing the test plate vertically.
Adopting axial flow fan to supply air, the wind speed can be adjusted steplessly, the wind speed in the wind tunnel is 3 +/- 0.3m/s, and it is equipped with Handheld AnemoMeter measurement, which is suitable for coating drying anti-crack performance testing.
Measurement accuracy 0.02mm, can control the slow expansion of crazing, test putty layer anti-substrate crazing ability.
With 450 +/- 2g brush weight and 300mm scrubbing Travel, scrubbing speed 37 +/- 2cpm, can accurately test the anti-scrubbing performance of coatings, suitable for interior and exterior wall coating inspection.
The axial flow fan is used to supply air and support stepless speed regulation of 0~ 3m/s, and the anemoMeter has a range of 0~ 10m/s, which is suitable for the determination of the initial drying anti-cracking performance of laminated architectural coatings.
Film thickness 0.5mm, rounded edge design without burr, surface with anti-rust oil, suitable for coating adhesion, hardness, Impact and other performance testing experiments.
Integrated mixing oscillation incubate three functions, temperature accuracy +/- 0.5 ℃, speed 200-1800rpm, metal module anti-pollution, support multi-point operation and timing operation.
The motor is used to drive the top edge to rise, the edge length is 150mm, and the rising rate is 3mm/min, which can accurately test the dynamic anti-cracking performance of the material against the crazing expansion of the substrate, and the operation is light and stable.
32 5ml centrifuge tubes can be installed vertically on both sides, using a vertical installation design, suitable for HT-X100 swirl/spin Mixer, improving Sample Handling efficiency.
Designed for fluorine ion measurement, it provides 250ml Encasement with anti-interference ability, which can effectively Shielding Miscellaneous ion interference and improve detection accuracy and Stability.
Made of wear-resistant and corrosion-resistant alloy steel to ensure durability and accuracy, film Film thickness range 850~ 1075μm, adjacent film thickness difference of 25μm, suitable for vertical, corner, round hole, arc workpiece painting control.
Double-sided horizontal mounting design can accommodate 40 centrifuge tubes simultaneously, compatible with 1.5ml and 2.0ml specifications, suitable for swirl/spin Mixer for efficient Sample Handling.
It features 1.5-second rapid stabilization capability, supports seven levels of anti-vibration filtering adjustment to adapt to complex environments, and adopts a new metal internal structure design for enhanced anti-static and anti-interference performance.
0.6KV~ 31.5KV full scale high voltage output, voltage accuracy +/- (0.1KV + 3% reading), intelligent control to ensure that the display voltage is the test voltage, pulse discharge to reduce coating secondary damage, sound and light alarm and leakage point counting function.
Adopting rotary oscillation design, Frequency 3000rpm, pendulum amplitude 5mm, suitable for small containers such as testtube and Colorimetric tube, it can efficiently handle the experimental requirements of large chemical reactions and few solutions.
