Laboratory Ultrapure Water Purification System

The laboratory ultrapure water system removes impurities from water through steps such as pretreatment, reverse osmosis, and deionization, producing water with a resistivity of up to 18.2 MΩ·cm. It is used for preparing reagents, cleaning glassware, and conducting analytical experiments to avoid interference from water quality on test results.
Selection
When selecting, consider matching water consumption with production speed, determine the water quality grade based on the testing items, reserve a pretreatment unit for influent water quality, verify the replacement cycle and cost of equipment consumables, and ensure that the spatial layout and drainage conditions meet installation requirements.

Terms

Standards

Instruments

The water pRoduction rate reaches 5L/h, the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, the desalination and sterilization rate is over 99%, supports intelligent control and a variety of water intake modes, suitable for laboratory environment use.

$ 3543.00

The water pRoduction rate is 10L/h, and the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, providing 18.25MΩ. cm ultra-pure water quality, supporting multiple water intake modes and intelligent control functions.

$ 4027.00

The eight-stage deep purification system ensures that the water quality is pure, the resistivity of the pRoduced water is 18.25MΩ .cm, and it is equipped with an intelligent Control system to realize automatic monitoring and a variety of water intake modes to meet the strict experimental requirements.

$ 4511.00

Suitable for ultra-low conductivity water sample measurement, Glass grinder liquid interface design, pH Measurement range 0-11, Temperature range 0-80 ℃, support can add liquid reference solution.

$ 273.00

With 80L/H water pRoduction capacity and 18.2MΩ · cm ultra-pure water quality, it supports regular automatic circulation and consumable life monitoring. It can disinfect and display three-way water quality with one click, prolong the service life of the ultra-pure water bag, and achieve efficient online monitoring.

$ 2834.00

With 40L/H water pRoduction capacity and 18MΩ · cm resistivity ultrapure water output, the 7-inch touchscreen displays three-way water quality and temperature in real time, supports automatic circulation, consumables reminder and disinfection functions, ensuring stable water quality and low bacterial contamination.

$ 4408.00

With five-point pH automatic calibration and USP standard conductivity analysis, support linear nonlinear temperature compensation, Data storage up to 50,000/group, Capacitive touch interface easy to operate.

$ 2211.00

The water pRoduction rate reaches 5L/h, the water intake Flow velocity is 0.8L/min, and the RO membrane intelligent anti-scale flushing and automatic domestic circulation system are supported to ensure the stability of ultrapure water quality, which is suitable for a variety of experimental needs.

$ 1897.00

The resistivity of the pRoduced water is greater than 18.2MΩ · cm, the water pRoduction capacity is up to 100L/H, and it is equipped with a 5.1-inch LCD screen to display water quality and temperature in real time. It supports automatic circulation and disinfection functions, effectively prolonging the life of consumables.

$ 3097.00

Temperature range from room temperature to 60 ℃, temperature control accuracy +/- 1 ℃. Equipped with air purification device and exhaust gas treatment system to prevent cross-contamination and meet environmental standards.

$ 5227.00

Flow velocity 1.5L/min, reverse osmosis (RO) membrane and purification column, intelligent microcomputer control to achieve automatic operation and online water quality monitoring, effective removal of trace ions.

$ 3430.00

The centrifugal fan with low energy consumption and reasonable air duct design is used to achieve uniform and stable airflow; the average wind speed is 0.25 to 0.45m/s, and the noise is less than or equal to 62dB (A); it is equipped with initial effect and effective Filter to meet the requirements of purification level.

$ 1013.00

Flow velocity 1.5L/min, reverse osmosis (RO) membrane and purification column are used to remove trace ions efficiently, and intelligent microcomputer control realizes automatic operation and online water quality monitoring.

$ 2784.00

The quasi-closed Glass damper prevents external air flow from penetrating, the dual-gear adjustable air volume system maintains the wind speed of 0.3~ 0.6m/s, the 304 stainless steel countertop is resistant to corrosion and easy to clean, and the purification efficiency reaches 100 levels.

$ 741.00

The integrated stainless steel countertop is corrosion resistant and easy to clean, equipped with any positioning sliding door system, the average wind speed is 0.3~ 0.6m/s, the cleanliness level is up to 100, and the pre-Filter quick replacement design is safe and convenient to use.

$ 1248.00

Articles

Ultrasonic Thickness Gauge Selection: Technical Considerations for Probe Configuration and Measurement Modes
This article primarily introduces the technical factors to consider when selecting an ultrasonic thickness gauge. In terms of probe configuration, the frequency affects both resolution and penetration depth, while crystal size determines adaptability to curvature and surface conditions. Dual-element probes offer a smaller dead zone compared to single-element probes, and delay-line probes are suitable for thin-wall and high-temperature applications.
Vacuum adsorption coating machine solves the flatness challenge in the transfer of ultra-thin graphene films.
The vacuum adsorption coating machine transfers graphene films smoothly onto target substrates through controlled negative pressure, solving issues such as wrinkling, tearing, and contamination often encountered with traditional methods.
Superhydrophobic surface coating is applied to the microstructure substrate using a film coating machine.
This article introduces the coating process of superhydrophobic surface coatings on microstructured substrates. Superhydrophobic coatings feature high water contact angles and low rolling angles, making them widely used in applications such as anti-fouling and waterproofing.
Ultrasonic thickness gauge for detecting thick coatings and composite coatings.
Ultrasonic thickness gauges measure coating thickness using the principle of ultrasonic pulse reflection, calculating the result based on the propagation time of sound waves in the material and the speed of sound. When detecting thick coatings and composite coatings, challenges such as acoustic attenuation of the material, unknown sound speed, and signal recognition at multi-layer interfaces must be addressed.
Analysis of Causes for Excessive Repetition Error in Microbalances
Microbalance repeatability out-of-tolerance refers to the situation where the results of multiple weighings of the same object exceed the allowable range of variation.
Ultrasonic Thickness Gauge Measures the Thickness of Flexible Packaging Materials
This article introduces the principles, technical points, and operational procedures for measuring the thickness of flexible packaging materials using an ultrasonic thickness gauge. It is based on the principle of ultrasonic pulse reflection, which calculates thickness by measuring the propagation time of sound waves through the material.
The principle of measuring dry film thickness with a coating thickness gauge
Coating thickness gauges measure dry film thickness through non-destructive methods, with commonly used principles including electromagnetic induction, eddy current, and ultrasonic methods.
To determine if an ultrasonic cleaner cleans effectively, first understand the two key parameters: frequency and power.
This article mainly discusses how to achieve thorough cleaning with an ultrasonic cleaner, emphasizing that the key factors are frequency and power. The frequency determines the size and penetrating ability of the bubbles generated during cleaning, while the power provides the necessary energy for the cleaning process.