Adopt Precision Sensor to achieve 0-50kgf insertion force test, support 0-60 times/minute speed regulation and 5-45mm Travel adjustment, with overload automatic stop and 10 sets of data automatic save functions.
Equipped with needle Probe for direct insertion measurement, the range covers -50 to 300 ° C, the accuracy reaches +/- 1 ° C, Repeatability +/- 1% or +/- 1 ° C, and it is small and lightweight only 60g.
Using 16-bit AD converter and K-type Thermocouple, sampling speed 16 times per second, Measurement range -50 ° C to 1300 ° C, support Fahrenheit switching and data retention functions.
Using S-type Sensor structure, Measurement accuracy of +/- 0.5%, with 10 data storage and automatic calculation functions, support for automatic conversion of N/kgf/lbf units, peak hold and automatic release functions can be freely set time.
Using S-type external Sensor, Measurement range 10%~ 100% FS, Indication Error less than +/- 0.5%, with peak hold and automatic unit conversion function, support Data storage and sound and light alarm settings.
With a wide temperature measurement range from -200 ° C to 1371 ° C, accuracy up to +/- 0.5 ° C, support Manual calibration and RS232 Interface, waterproof design to ensure stable operation in humid environments.
Waterproof design ensures safe use in humid environment, supports three Thermocouple Probe types, Measurement accuracy up to +/- 0.5 ℃, dual measurement interface can connect two Probes at the same time, equipped with data locking and temperature Unit switching function.
Measured value 500N, suitable for rubber, cable, paper, electrical components, Plastic film and other materials tensile force, destructive force and insertion force test, supporting the Force Gauge test bench.
Dual Probe design can measure two samples at the same time, equipped with BEPS low power error prevention system to avoid wrong readings, Measurement accuracy of +/- 0.5 ℃, support K/J/T type multiple temperature sensors, waterproof design to adapt to complex environments.
With penetrating AISI 316 stainless steel Probe, easy to clean and insert semi-solid pRoducts. With CAL Check ™ boot self-check function, temperature accuracy of +/- 0.2 ℃, Measurement range covering -50.0~ 220 ℃.
Measured value 500N, suitable for rubber, cable, paper, electrical components, Plastic film and other materials tensile force, destructive force, insertion force test, supporting Force Gauge test bench.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
Measurement range 10%~ 100% FS, accuracy error less than +/- 0.5%, with peak holding, Data storage and automatic alarm functions, support for automatic conversion of various units and PC connection to achieve Linear dispersion test.
Foldable stainless steel probe design, temperature range -49.9~ 49.9 ℃, Accuracy up to +/- 0.5 ℃, equipped with large LCD display and Fahrenheit switching function, easy to high temperature liquid safety measurement.
Temperature range from -50.0 to 1350 ℃, support dual-line display real-time and maximum MIN Minimum, equipped with automatic shutdown and HOLD locking function, resolution of 0.1 ℃/1 ℃, adapt to a variety of environmental conditions.
