Using thread drive mechanism and bearing support, Angle Measurement range 0-45 °, Graduation 2.0 ′, test Rod weight 270g +/- 5g, repeability measurement can be averaged 9 times to ensure High Accuracy and Safety and Reliability.
Using 100LPI line number and quadrilateral pyramid hole structure, the transfer uniformity of inks is precisely regulated through hole shape and line number, which affects the wet film thickness and ensures the stability of ink supply.
Non-contact measurement distance 7.5mm +/- 3mm fluctuation is still accurate, the measurement time is only 20ms, built-in auto calibration and Gloss compensation technology to ensure accurate and reliable Color data.
The Water-Cooled cooling system is adopted to ensure stable operation. The 395nm wavelength LED Illuminant provides uniform illumination. The light Power reaches 12W/cm ² and the illumination distance is 30-50mm. It has over-temperature protection and Power 0-100% adjustment function.
Electrochemical sensor, Response Time ≤ 20 seconds, resolution 0.1ppm. With ultra-high waterproof design, provide replaceable in-line module Sensor, support two-level triple alarm function, compact and portable.
With +/- 1000mV wide range measurement and manual two-point Adjustment, support automatic diagnosis ElectRode status and fail-safe alarm system, effectively prevent signal interruption problems.
Measurement range 0~ 1500μm, accuracy +/- (5μm + 5%), stylus end angle of 60 degrees, suitable for surface profile measurement, with line design for easy connection.
Built-in temperature sensor, no need to add reference fluid, PTFE liquid junction and 3/4NPT thread design, Cable length is 5 Meters.
Adopting quadrilateral pyramid mesh structure, line number 300LPI, print width 70mm, chrome plating on the surface to enhance Abrasion Resistance and block solvent corrosion, electronic engraving technology to ensure accuracy.
Waterproof design can be used in humid environments, dual-line display displays the current value and extreme value at the same time, low-power error-proof system avoids wrong readings, temperature range -50.0~ 150.0 ℃, accuracy +/- 0.4 ℃.
Equipped with a low-power error-proof system to avoid erroneous readings, the dual-line display screen simultaneously displays the current temperature and recorded value, the temperature measurement range covers -200 ° C to 1371 ° C, supports ℃/° F Unit switching, waterproof design adapts to a variety of environments.
Built-in 15ml test solution can be used more than 100 times, pen design to reduce liquid and air contact, in line with ASTM D2578 and TAPPI T698 standards, 6 months valid period to ensure test accuracy.
Measurement range 0~ 12mm, accuracy of 0.01mm, using digital High Accuracy hundred (thousand) sub-Meter head, easy to operate and safe and reliable measurement, in line with GB/T 16311-2009 standard requirements.
Built-in 15ml test solution, can be used more than 100 times, pen design to reduce the contact between dyne liquid and air, in line with ASTM D2578 and TAPPI T698 standards, effectively control the material surface tension.
Built-in 15ml test solution can be used more than 100 times, pen design to reduce liquid and air contact, shelf life of 6-8 months, in line with ASTM D2578 and TAPPI T698 standards, through multiple inspections to ensure reliable quality.
