Four-paraMeter water quality Detector

The four-parameter water quality detector measures pH, dissolved oxygen, conductivity, and turbidity in water through electrodes. The pH electrode detects hydrogen ion concentration, the dissolved oxygen electrode measures oxygen content, the conductivity electrode assesses ion conductivity, and the turbidity sensor measures suspended particles. It is used for rapid on-site monitoring of basic water conditions.
Selection
When selecting, consider that the measurement range should cover the variations in the water body to be tested, the accuracy should meet monitoring requirements, the electrode material should be corrosion-resistant, the device should have temperature compensation functionality, the operation interface should be simple, it should support data storage, the instrument should be portable for field use, and maintenance costs should be reasonable.

Terms

Standards

Instruments

With 12 water quality paraMeter detection capabilities, resolution of 0.001mg/L, Repeatability 2%, micro-processing technology and long-life Illuminant, support custom Linear dispersion calibrating and data smoothing.

$ 1058.00

Can simultaneously measure 10 water quality indicators, IP67 waterproof design to adapt to harsh environments, built-in 45000 sets of data storage capacity, automatic identification of calibrating points to ensure Measurement accuracy.

$ 2247.00

With 5 measurement functions, support 1 to 5 point Conductivity Detector calibrating and automatic temperature compensation, can customize 13 paraMeters, equipped with 500 data storage and USB Communication interface, suitable for a variety of water quality paraMeters accurate measurement.

$ 667.00

Integrate 8 water quality paraMeter measurement functions, support automatic temperature compensation and calibrated reminders, equipped with 500 sets of data storage capacity, and adopt multi-mode power supply scheme to ensure long-term outdoor use.

$ 909.00

Support 16 water quality paraMeters synchronous testing, equipped with IP67/IP68 waterproof rating and automatic temperature compensation system, data storage capacity up to 45000 groups, Measurement range covers 0-400mS/cm conductivity and 0-1000FNU turbidity.

$ 8494.00

Can simultaneously measure 7 water quality indicators, IP67 waterproof design, 45000 data storage capacity, support 1 second to 3 hours custom storage interval, with automatic temperature compensation and GLP management function.

$ 2615.00

12 water quality paraMeters can be measured simultaneously, with IP67 waterproof rating and 45,000 data storage capacity, support automatic temperature compensation and fast calibrating, with backlit graphic display and intuitive Operating interface.

$ 2949.00

It can simultaneously measure 7 water quality paraMeters, equipped with IP67 waterproof body and IP68 waterproof ElectRode, supports 45,000 Data storage and 1 second to 3 hours custom storage interval, with automatic temperature compensation and error diagnosis function.

$ 3247.00

ED test technology integrates 8 specific absorption peak wavelengths, can detect more than 50 water quality items, supports user-defined 100 Measuring methods, with IP65 Protection Rating and 2000 sets of Data storage capabilities.

$ 1806.00

Can simultaneously measure 10 water quality indicators, including pH, ORP, conductivity, etc., with IP67 waterproof and automatic temperature compensation function, data storage capacity of 45,000, adapt to harsh environment measurement needs.

$ 3373.00

Simultaneous measurement of 7 water quality paraMeters, turbidity Measurement range 0-50NTU, accuracy +/- 5%, in line with USEPA 180.1 standard, with chroma compensation and Illuminant automatic compensation function, reducing interference without frequent calibrating.

$ 2363.00

It can simultaneously measure 16 water quality paraMeters, IP67 waterproof design, equipped with fluorescent DO Probe and automatic temperature compensation, data storage capacity of 45,000 pieces, support Bluetooth data transmission and GLP calibrated recording.

$ 5153.00

It can simultaneously measure 7 water quality paraMeters, equipped with 45,000 data storage capacity, adopts IP67 waterproof grade and intelligent ElectRode identification system, supports automatic temperature compensation and fast Adjustment.

$ 2074.00

It can simultaneously measure 7 water quality indicators, IP67 waterproof level, 45000 data storage capacity, automatic temperature compensation and fast Adjustment, adapt to the harsh environment such as pipeline deep wells.

$ 2345.00

16 water quality paraMeters can be measured simultaneously, equipped with IP67/IP68 waterproof rating, support automatic temperature compensation and 44,000 Data storage, Measurement accuracy of +/- 0.02pH, intuitive and convenient operation.

$ 7264.00

Articles

Application of Gravure Printing Proofer in Water-based Ink Proofing and Pinhole Defect Evaluation
This article introduces how the gravure printability tester is used for water-based ink proofing and pinhole defect evaluation. Water-based inks are environmentally friendly but prone to tiny pinhole defects. The instrument enables standardized sample preparation and reduces human interference by controlling parameters such as cell depth and doctor blade angle.
Application of Flexographic Proofing Press in Evaluating Color Reproducibility of Flexographic Inks
This article primarily discusses the use of a flexographic proofer to evaluate the color reproducibility of flexographic inks. It introduces the role of the proofer in simulating production conditions and explains how to prepare samples by setting parameters such as pressure, speed, and anilox roll specifications.
Application of Drop Hammer Impact Testing Machine in Evaluating Impact Resistance of Composite Materials
This article introduces how the drop-weight impact testing machine evaluates the impact resistance of composite materials. The test releases a weight to strike the specimen, measuring parameters such as energy absorption, peak load, and damage area, simulating low-velocity impacts like tool drops.
Impact of the Fixture Design of a Drop Hammer Impact Tester on the Plastic Impact Strength Results
This article primarily discusses the impact of the fixture design of a drop-weight impact testing machine on the results of plastic impact strength tests. The geometric parameters of the fixture, clamping method, and contact surface material can alter the stress state and energy transfer of the specimen, thereby affecting the accuracy of the test data.
Application of High-Temperature Universal Testing Machine in the Study of Hot Modulus of Rupture of Refractory Materials
This article introduces the application of a high-temperature universal testing machine in measuring the hot modulus of rupture of refractory materials. It explains the working principle, testing procedure, and key parameters of the testing machine, such as the effects of heating rate, holding time, and loading rate.
Cost-performance analysis of single-channel versus multi-channel switching modules when selecting a laboratory ion meter.
This article compares the cost-effectiveness of single-channel and multi-channel switching modules for laboratory ion meters. Single-channel devices have lower purchase costs, but additional instruments are required for each additional detection parameter. Multi-channel units have higher initial investment, but when testing more than three parameters, the total cost over three years is lower and the sample throughput is greater.
Application of High-Frequency Fatigue Testing Machine in Infinite Life Testing of Valve Springs
This article discusses the application of high-frequency fatigue testing machines in the infinite life testing of valve springs. The test simulates the long-term working stress of the spring through high-frequency cyclic loading, with parameters such as preload, amplitude, and cycle count set according to international standards.
Resistance Tester Selection: Measurement Methods for Low Resistance and High Resistance
This article introduces the selection method of resistance testers. Based on the range of the measured resistance, low resistance requires the four-wire Kelvin method, using constant current and voltage measurement to eliminate the influence of contact resistance; high resistance uses the voltage method to measure tiny currents, with attention to shielding and leakage prevention.
Optimization of mixing efficiency of vortex mixer in liquid-liquid microextraction
This paper explores how to enhance mixing efficiency in liquid-liquid microextraction by adjusting the operating parameters of a vortex mixer.
Flexographic proofing press is used for evaluating the printability of water-based inks on kraft paper.
This article explores the use of flexographic proofing printability testers to evaluate the printing performance of water-based inks on kraft paper. The instrument simulates actual printing conditions, enabling quantitative analysis of key parameters such as ink transfer rate, print contrast, and dot gain.
A Comprehensive Guide to Selecting an Electronic Balance
This article introduces the key points for selecting an electronic balance. It provides a detailed list of core parameters such as accuracy class, repeatability, and linearity error, and explains their impact.
Guide to Selecting a Laboratory Rotational Viscometer for Coatings Development
This article introduces how to select a laboratory rotational viscometer in coatings research and development. It first explains the principle of rotational viscometers measuring viscosity based on shear resistance, and then points out that key parameters to consider during selection include measurement range, shear rate, temperature control, and rotor configuration.
Automatic coating machines are used for the uniform application of conductive silver paste onto ITO glass.
This article explores the technique of uniformly coating conductive silver paste on ITO glass using an automatic coating machine. By controlling parameters such as coating speed and pressure, the automatic coating machine replaces traditional manual methods, thereby enhancing the consistency and repeatability of the coating process.
Study on the Dispersion Uniformity of Blade Coating Machines in High-Load Electrode Slurry Coating
This article investigates how to optimize the dispersion uniformity of coatings by adjusting process parameters when using a blade coater to handle high-load electrode slurries.
Application of Laboratory Coating Machines in the Coating of Optical-Grade PET Anti-Reflection Coatings
This article discusses the application of laboratory coating machines in the preparation of anti-reflective coatings on optical-grade PET substrates. By controlling parameters such as coating speed and gap, the coating machine enables precise adjustment of coating thickness, thereby enhancing light transmittance and reducing reflection.