Dispersing disc stirrer

The dispersing disc agitator generates shear force through a high-speed rotating serrated disc, breaking up particles and evenly distributing them in the liquid. It is used for material mixing and dispersion in industries such as coatings and inks, preventing sedimentation and agglomeration.
Selection
When selecting, consider the viscosity of the material to match the speed range, determine the disc diameter ratio based on the container size, choose stainless steel or carbon steel material according to the corrosiveness, ensure the motor certification corresponds to the explosion-proof environment, and determine the continuous working time based on heat dissipation requirements.

Terms

Standards

Instruments

Using 1500W Power and 120mm dispersion disc, support frequency conversion speed regulation and continuous operation, servo brushless motor operation stable and efficient, dispersion disc corrosion resistance and removable replacement.

$ 519.00

Rotation speed is constant with brushless DC motor, output torque is large, support 3L Max. stirring capacity. Disc heating table heat concentration, with anti-corrosion liquid guide Tank design, improve operation safety and durability.

$ 351.00

Double disc independent control can be operated by double person at the same time, the diaMeter of the throwing disc is 230mm, the Rotation speed is 900rpm, the transmission is stable and the noise is small, the operation and maintenance are convenient, and it is suitable for polishing requirements of various materials.

$ 485.00

Double disc independent control can be used for double person operation at the same time, smooth transmission and low noise, throwing disc diaMeter 230mm, Rotation speed 650rpm or 800rpm optional, easy operation and maintenance.

$ 648.00

Double disc independent operation can be used by double persons at the same time, the diaMeter of the throwing disc is 230mm, equipped with a polishing water supply system and a drawer-type sewage collection box, the transmission is smooth and the noise is low.

$ 570.00

Adopt Rotation Rotation Rotation Noncontact Mixing & dispersing method, Rotation Rotation ratio 1:0.7, Processing capacity up to 700ml, can complete defoaming stirring in a few seconds to a few minutes, No need to clean appliances, Repeatability is high.

$ 3301.00

Double disc independent control can be operated by double person at the same time, the diaMeter of the throwing disc is 230mm, the Rotation speed is 900rpm, the transmission is stable and the noise is small, and the operation and maintenance are convenient.

$ 485.00

Double disc independent operation, Rotation speed 50~ 1400rpm stepless speed regulation, throwing disc diaMeter 230mm, equipped with water supply system and drawer type sewage box, smooth transmission and low noise.

$ 1328.00

Adopt closed system design, mixing capacity 5-200G, Speed range 1500-3500rpm, can achieve fast and efficient Mix & disperse, the operation process is quiet, pollution-free and bubble-free, support manual and intelligent two control modes.

$ 6851.00

The device can quickly mix ground dispersed materials in a closed system, with a speed range of 1500-3500 rpm, a mixing capacity of 5-150G, and features bubble-free and quiet operation.

$ 6205.00

Using LCD and Button-Operated knob for easy operation, Nano Pottery and porcelain disc improve high temperature hardness and heat resistance Impact performance, support 0~ 1600rpm stepless speed regulation and 0~ 60 ℃ Temperature range, with independent safety circuit and temperature sensing monitoring.

$ 214.00

Adopt single chip microcomputer automatic control, grinding disc diaMeter 220mm, load weight up to 2.92kg, compact structure, easy assembly and disassembly, suitable for pigment physical performance inspection.

$ 1106.00

Rotation speed is constant with brushless DC motor, Max. stirring Capacity 5L, disc heating table is suitable for circular beaker stirring, with anti-corrosion liquid guide Tank to protect internal devices.

$ 330.00

Mechanical design can be measured on any surface, measurement disc diaMeter 50mm, thickness 11mm, using hard grinding stainless steel material, equipped with aluminum free swirl/spin roller, the reading scale is clear and easy to read.

$ 961.00

Mechanical design allows direct measurement on a variety of surfaces, no power supply required; hardened stainless steel material ensures durability, measurement disc diaMeter 50mm thick 11mm; equipped with aluminum free swirl/spin rollers for easy operation, reading scale directly engraved on the side.

$ 961.00

Articles

Extended Application of Paper Water Absorption Tester in the Dispersibility Evaluation of Tissue Paper
This article explores how to extend the application of an instrument originally used for testing the water absorption capacity of paper to evaluate the dispersibility of tissue paper.
Study on the Dispersion Uniformity of Blade Coating Machines in High-Load Electrode Slurry Coating
This article investigates how to optimize the dispersion uniformity of coatings by adjusting process parameters when using a blade coater to handle high-load electrode slurries.
Selection of laboratory grinders is based on the fineness requirements of coatings, choosing between ball mills or sand mills.
The selection of a laboratory grinder should be based on the fineness requirements of the coating. A fineness greater than 50 microns indicates coarse dispersion, 10 to 50 microns is considered medium fineness, and less than 10 microns requires high fineness dispersion.
When selecting a laboratory disperser, it is essential to evaluate the dispersion capacity and the speed range.
When selecting a laboratory disperser, it is crucial to evaluate the dispersion capacity and speed range. The dispersion capacity should be determined based on parameters such as material viscosity and solid content to avoid uneven dispersion or localized overheating caused by excessive or insufficient capacity.
Capacity Matching for Laboratory Small Dispersers and Pilot Dispersers
This article primarily discusses how to select the appropriate disperser for laboratory research and process development.
Laboratory dispersers achieve efficient dispersion of paint pigments.
This article introduces how laboratory dispersers efficiently disperse paint pigments. They break up pigment agglomerates through mechanical actions such as shear force, involving three stages: wetting, dispersing, and stabilizing.
Selection of disperser speed range and matching of dispersing disc form with container
This article discusses the technical points in the selection of a disperser, including the speed range, the form of the dispersion disc, and the matching with the container.
How to Match the Selection of Fineness Gauge with Grinding Process Requirements
The fineness gauge is used to measure the particle dispersion of materials such as slurries and coatings, reflecting the particle size distribution through the depth of grooves on its surface.
Laser particle size analyzer measures the particle size distribution of spray powder.
Laser particle size analyzers measure the particle size distribution of sprayed powder based on the principle of light scattering, which is critical for coating uniformity and adhesion. During measurement, the powder must be dispersed in a suitable medium to avoid agglomeration, and tests should be repeated to ensure accuracy.
Operating Specifications and Result Interpretation of Paint Fineness Gauges
The fineness gauge is used to measure the dispersion of particles in paint. During operation, the sample should be applied to the groove under standard conditions, and a scraper is used to spread it evenly to form a wet film. The particle visibility is then observed under appropriate lighting, and the fineness value is read from the corresponding scale.
The laboratory pulp wet disintegrator is used for pulp disintegration treatment.
The laboratory pulp wet disintegrator is a device used to simulate the industrial pulping process. It disperses pulp fibers into individual fibers or small fiber bundles through mechanical action, while simultaneously promoting fiber swelling and fibrillation, thereby providing standardized samples for subsequent performance evaluation.
The impact of the disperser impeller structure on dispersion effectiveness.
This article mainly discusses how the impeller structure of a disperser affects the dispersion effectiveness. The impeller is the core component of a disperser, and its design directly influences the uniformity and stability of the final mixture.
Application of High-Speed Disperser in the Preparation of Water-Based Inks
This article introduces the application of a high-speed disperser in the preparation of water-based inks. It first explains the working principle of the equipment, which involves generating shear forces through high-speed rotation to disperse particles.
Ink fineness gauge measures the dispersion degree of pigment particles.
The fineness of grind gauge is a method used to evaluate the dispersion level of pigment particles in ink.
Comparison of Pigment Fineness Dispersion between Flat Grinding Mill and Sand Mill