Made of stainless steel, the film thickness can be adjusted freely within the range of 0~ 3500 μm, the accuracy is +/- 2 μm, and the drawdown blade gap is precisely controlled by the differentiator to achieve accurate Spreader.
Equipped with a specific weight handle to achieve uniform pressure coating, no need for manual pressing; using a formed pRoduction process, the wet film thickness is controlled at 15 μm, and 304 stainless steel material ensures durability.
The formed pRoduction process ensures uniform coating, the wet film thickness is precisely controlled at 9 microns, and three lengths of 250mm, 400mm and 60mm are available.
Using precision drawing stainless steel wire winding structure, wet film thickness 40μm, application width 220mm, Coating thickness is precisely controlled through the groove to achieve uniform repeability Spreader effect.
A wet film of 100.6 microMeters was prepared using a wire-winding process, with a coating width of 300 mm. The film thickness was precisely controlled using a steel wire with a diaMeter of 1.12 mm, and the extrusion process eliminated the need for wire winding.
Coating thickness is controlled by wire-wound structure, wet film thickness reaches 100μm, application width 420mm, uniform groove is formed by precision stainless steel wire winding to achieve repeability Spreader effect.
Manufactured by precision wire-wound process, the wet film thickness is accurately controlled to 24μm, and the application width is 220mm. It is suitable for a variety of substrate surface Spreaders to ensure coating uniformity and Repeatability.
The precision drawing stainless steel wire winding structure is adopted, and the wet film thickness is precisely controlled by the groove. The closed winding design supports 4-120 μm coating, and the spiral winding can reach 500 μm thickness.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Coating thickness is controlled by wire-wound structure, wet film thickness up to 80μm, application width 420mm, uniform groove is formed by precision stainless steel wire winding to ensure Spreader Repeatability and accuracy.
Using extrusion process and chrome plating surface preparation, the minimum wet film thickness can be controlled by 1.5μm. The groove design is wider than that of traditional pRoducts, and the Coating Weight is larger and not easy to block.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Measurement principle using ultrasonic, Measurement range 50~ 3800μm, accuracy +/- (2μm + 3%), suitable for concrete and fiberglass substrate Coating thickness detection.
Using the formed pRoduction process, the wet film thickness is 6 microns, the accuracy is 0.5 microns, the cleaning is convenient and there is no worry of broken wire, to ensure the precision and durability of the coating prepative.
Measurement thickness up to 25mm with an error of only +/- 3% with removable FJS Probe for thick protective coating substrates, statistical capabilities and 250,000 Data storage capabilities.
