Using 0.06mm ultra-fine steel wire, soft bristles, effective cleaning of anilox rollers and Mayer Rods, to avoid surface damage, handmade to ensure mass.
Using 0.06mm ultra-fine stainless steel wire, the wire diaMeter is thinner than the common 0.07mm in the market, the bristles are soft and can be deeply cleaned without damaging the roller surface, suitable for fine cleaning applications.
Using 0.06mm ultra-fine steel wire, the bristles are soft, allowing for deep cleaning of anilox rollers and Mayer Rods to avoid surface damage, and are handmade by experienced craftsmen to ensure quality.
Adopt stainless steel mirror liner and ultra-fine fiberglass insulation, Temperature Fluctuation ≤ +/- 0.5 ℃, uniformity ≤ +/- 2 ℃, equipped with large screen Touchscreen and automatic calculation function, improve temperature and humidity control accuracy and operation convenience.
Adopt stainless steel mirror liner and ultra-fine fiberglass insulation cotton, equipped with French Taikang fully enclosed Compressor, Temperature Fluctuation ≤ +/- 0.5 ℃, support 100 sets of program editing and RS-232/485 communication, improve test stability and convenience.
Using 0.06mm ultra-fine steel wire, the bristles are soft and effective to clean without hurting the surface, the 6-line bristle design improves the cleaning efficiency, and the wooden base Film thickness 13mm ensures the operation stability.
Using 0.06mm ultra-fine steel wire, thinner than 0.07mm common in the market, the bristles are soft and do not hurt the roller surface; handmade to ensure mass, four lines of 62-hole design to improve cleaning efficiency, wooden base operation is stable.
Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
Speed range 5000 to 35000rpm, output power 120W, support stepless speed regulation, working head with SS316L material, maximum temperature 120 ℃, suitable for micro Sample Handling, with high linear speed and shear force.
360 degree tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 80L, minimum discharge particle size 0.1μm, support dry grinding, wet grinding, vacuum and other grinding methods, equipped with a variety of materials ball mill Tank to adapt to different samples.
Speed range 5000~ 35000rpm, output power 120W, using SS316L stainless steel working head, providing high linear speed shear force, support micro Sample Handling and high viscosity medium.
Set dispersion and sand grinding functions in one, complete two processes in a single container, speed range 130~ 3000rpm, grinding basket size Φ 80x60mm, high efficiency and easy to clean.
The variable frequency motor is used to achieve stepless speed regulation from 0 to 7500 rpm, equipped with dispersed impeller and sand grinding blades, and the dual-axis constant force lifting system has a stroke of 200mm, which can adapt to different experimental requirements and calculate the material reaction relationship.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, and the fineness of grinding can reach 25 microns or less, suitable for sample testing, with a capacity of 1.5 liters.
Temperature range -60~ 150 ℃, humidity control 30~ 98% RH, using ultra-fine Glass insulation cotton and double-decked silicone rubber sealing, equipped with independent over-temperature protector and multi-layer conductive film observation window to ensure stable and safe testing.
