Wall-Mounted waterproof structure is equipped with PTFE anti-clogging dialysis membrane, supports 0.0-14 pH Measurement range and +/- 0.2pH accuracy, alarm point can be set at 3-11pH, LED light reminder when the setting exceeds +/- 0.5pH, extending ElectRode life.
Wall-mounted spray tower saves space, atomization particles are fine and uniform; Titanium alloy heating pipe with Hot Plate improves Temperature uniformity, energy consumption is reduced by about 50%; support automatic water inlet and water shortage protection, test area temperature error +/- 2 ℃.
The small design is only 23x20cm, the maximum centrifugal force is 500xg, and the speed is 2500rpm. It can handle 2x96 hole plates, avoid liquid leakage by vertical loading, and improve the experimental efficiency.
Temperature range -20~ 150 ℃, volume 800L, mirror stainless steel inner wall and automatic adjustment refrigerator operation, to ensure Temperature Uniformity ≤ 2.0 ℃, suitable for high and low temperature cycle test.
With indoor and outdoor temperature measurement function, the range covers -50 ° C to 99 ° C, the humidity measurement accuracy reaches +/- 5% RH, the maximum and minimum temperature and humidity values can be recorded, and the base and wall mounting are supported.
Mirror stainless steel inner wall and fiberglass insulation material, temperature range -70~ 150 ℃, uniformity ≤ 2.0 ℃, equipped with automatic adjustment refrigeration system and anti-condensation device to ensure stability testing environment.
Using 7.0 inch Touchscreen controller, high temperature and humidity control accuracy, Fluctuation ≤ +/- 0.5 ℃, humidity deviation + 2, -3% R.H; built-in stainless steel humidifier, multi-wing air supply circulation, uniform temperature and humidity distribution, improve test reliability.
Adopt binary cascade refrigeration mode, temperature range -40 ℃ to 150 ℃, equipped with mirror stainless steel inner wall and automatic energy saving control system to ensure the test environment is stable and uniform.
Microcomputer temperature and humidity controller, Temperature Fluctuation +/- 0.5 ℃, humidity fluctuation +/- 5% RH, with over-temperature protection, independent temperature limit alarm system to ensure safe and stable operation of the experiment.
Using 7.0 inch Touchscreen controller, high temperature and humidity control accuracy, Temperature Fluctuation ≤ +/- 0.5 ℃, humidity deviation + 2, -3% R.H, with multi-wing air supply cycle to ensure uniform distribution, improve test reliability.
Temperature range -30~ 150 ℃, humidity control 30~ 98% R.H., using PID control mode to ensure small temperature and humidity fluctuations, equipped with independent over-temperature protector and multi-layer sealing structure to improve test reliability and safety.
Adopt 7.0 inch Touchscreen controller, support 100 programs and 1000 cycles; high temperature and humidity control accuracy, temperature fluctuation ≤ +/- 0.5 ℃, humidity deviation + 2, -3% R.H; built-in stainless steel humidifier and French Taikang Compressor to ensure stable and reliable testing.
Temperature control accuracy of +/- 1 ℃, uniformity ≤ 2.0 ℃, mirror stainless steel inner wall and fiberglass insulation, support automatic adjustment of refrigeration operation, volume 225L, suitable for a variety of environment testing needs.
The mirror stainless steel liner is easy to clean, the TMHM equilibrating conditioning method controls temperature and humidity accurately, Temperature Fluctuation +/- 0.5 ℃, Humidity deviation +/- 3% RH, with independent temperature limit alarm system.
Temperature range -10~ 100 ℃, humidity control 35~ 95% RH, with independent temperature limit alarm system and multi-stage programmable PID controller to ensure safe operation and precise control of temperature and Humidity.
