High Accuracy Stepping Control system, support HR, HB, HV conversion scale, large test space, Built-in Printer and RS-232 interface, suitable for a variety of hardness of materials.
With three Adjustments, it can simultaneously measure Richter, Brinell, Rockwell and other Hardness values, indication Repeatability 6HLD, support 360 ° measurement direction, standard D-type Impact device and optional Miscellaneous type, anti-vibration Impact electromagnetic interference.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
Support six kinds of Hardness standard conversion, equipped with high luminance LED backlight, metal shell anti-interference, standby time up to 100 hours, can store 600 sets of data, adapt to various harsh environments.
The device adopts D-type Impact device, supports 360 ° measurement, can display a variety of Hardness standards, has 600 sets of Data storage capacity, is small in size and weighs only 0.2kg, and has a standby time of 100 hours. It is suitable for small spaces and field environments.
The use of New material has a long life, stable fullness point and correction point, and can measure 0.6-8 mm thickness materials. Hardness value can be converted into Vickers, Rockwell and other standards.
The use of New material has a long life, stable fullness point and correction point, Hardness value can be converted into Vickers Rockwell Brinell, the range is 0-20HW, and the accuracy is 0.5HW, which is suitable for workpieces with a thickness of 0.6-13 mm.
Using 45 degree angle fixed test, equipped with adjustable load (500g/250g) and adjustable traverse speed (5mm/s), electric control running smooth noise is small, Test Travel can reach 90mm, the platform is suitable for a variety of samples.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
The Che design can be operated with one hand, the test range is equivalent to Brinell 25-135HB, and the measurement can be completed on one side without support. It has the function of extreme value retention and average calculation of 29 sets of data.
Adopt 45 ° test angle and adjustable load system, the test platform traverse speed 0.5-10 mm/s adjustable, equipped with LCD display real-time monitoring, to meet the needs of accurate coating Hardness detection.
It can directly display six Hardness standards, support 360-degree measurement direction, store 600 sets of data, and operate continuously for 10 hours with lithium battery power supply. It is compact and portable and weighs only 110 grams.
Adopt oblique block to adjust the gap, good self-cumbersome and high adjustment accuracy; Roller cylindricity ≤ +/- 2um, Hardness up to HRC62 and hard chrome plating to prevent rust; Electric rolling can be reversed, and the film thickness and speed can be adjusted.
High Accuracy photoelectric induction switch and precision screw drive, the load can be stacked 500/750/1000g, the test angle is 45 °, the operation is accurate and stable, in line with a variety of international standards.
Imported special steel pressure needle, Hardness and long life, range 0-20HW, can directly read the Hardness value, suitable for on-site rapid testing, Stability and portability.
