Using 160 line metal anilox roller and rubber roller combination, print width 70mm, suitable for inks proofing, wet film thickness and the number of lines inversely proportional, proofing authenticity and easy to operate.
The dual-station design can simultaneously carry out two sets of tests, the roller load is 2000g +/- 5g, and the rolling speed is 300mm/min, which conforms to CNS-11888 and PSTC-8 standards to ensure uniform preparation of the sample.
Uniform Spreader with dual roller structure, 160 lines/inch anilox roller precisely controls film fineness, metal plating anilox roller ensures durability and supports multi-material Spreader testing.
Using 200LPI anilox roller and 70mm print width, metal anilox roller and rubber roller combination, the handle is made of stainless steel, suitable for a variety of inks Spreader and good sample repRoducibility.
Adopt horizontal three-roller extrusion grinding, roller clearance hand adjustment, maximum processing viscosity 3000000cps, roller can be cooled down water temperature control, fineness control precision, suitable for a variety of viscosity materials.
Rotation speed of the ball mill can reach 1100rpm, the minimum discharge particle size is 0.1μm. It supports dry and wet milling and various material Tanks, and the grinding is uniform and efficient.
Maximum feed size 2mm, minimum discharge particle size 0.1um, support dry grinding wet grinding vacuum grinding and other methods, equipped with a variety of materials ball mill Tank, can control Rotation speed and time to ensure grinding Repeatability.
The metal plating anilox roller with 120 lines/inch quadrilateral pyramid mesh hole is used to achieve uniform Spreader with rubber roller, and the print width is 70mm, which is suitable for film effect testing of various liquid materials.
Rotation speed of the ball mill can reach 850rpm, the minimum discharge particle size can reach 0.1μm. It supports dry grinding, wet grinding and other grinding methods, and has adjustable speed rolling and intermittent operation functions.
Roller diaMeter 65mm, processing capacity 0.5-10 kg/h, support chill down water temperature control, emergency brake protection, can be customized ceramic roller material, to adapt to viscosity ≤ 3,000,000cps material.
Using 140 wire metal anilox roller to control ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and high repRoducibility.
Three rollers are used to crush each other to destroy the molecular binding force, and the material is crushed and mixed. The size of the roller is 65x135mm, the rotation speed of the middle roller is 88rpm, and the particle size of the starting material is 50~ 100μm.
Using 100 wire metal anilox roller to control ink film thickness, it can quickly prepare flexographic samples, easy to operate and clean, and good repRoducibility.
Equipped with 140lpi, 180lpi, 200lpi anilox roller and metal engraving roller to control ink film thickness, can quickly pRoduce flexographic samples, easy to use and clean, good repRoducibility.
Using 400 wire metal anilox roller to control the ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and the repRoducibility is very similar to that of conventional flexographic printing.
