Impact energy 3N, Impact device mass 75g, suitable for measurement of small or thin specimens and surface hardening layer, the minimum thickness can be measured 1mm and the minimum hardening layer depth 0.2mm.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Using diffuse transmission optical path design, optical density Measurement range 0.00-6 OD, light transmitance accuracy +/- 2%, can simultaneously measure light transmitance, absolute optical density, relative optical density and Dot area ratio.
Cube Applicator can achieve 70/150μm double-sided Film thickness Spreader, through the hardening process to ensure that the overall uniform hardening, Spreader width 12mm, guide plate design for narrow Glass panel direct use.
Width 2cm, optical path 10mm, dimensions 12.5 × 22.5 × 45mm, specially designed for Spectrophotometer matching Cuvette, to ensure Optical inspection detection accuracy.
The application width can be adjusted freely, and the drawdown blade Coater can be adapted to meet different experimental testing needs and realize flexible film operation.
The width is 3cm, the optical path is 10mm, and the dimensions are 12.5 × 32.5 × 45mm. As a special accessory for Spectrophotometer, it ensures the stability of the optical path and the accuracy of measurement.
Impact energy is only 2.7mJ, minimal damage to the measured surface, does not damage the hardened layer, suitable for testing 1mm thickness of small parts, Cedar diaMeter minimum 0.32mm.
Through hardening process to ensure uniform overall hardening, longer service life accuracy and more stable, providing 38/76μm double-sided Film thickness selection, Spreader width 12mm accuracy of +/- 2μm, equipped with removable guide plate for narrow Glass panel operation.
Application width 500mm, wet film thickness 0.005-3mm adjustable, using servo drive and PLC control, with automatic tension and correction function, suitable for a variety of coils and Coating types.
Adopting chip tray direct temperature control technology, the heat exchange speed is 1-3 seconds, the speed range is 100-3000 rpm, the acceleration is 100-3000 rpm, and it has 5-stage speed adjustment and 12 sets of parameter memory functions, suitable for a variety of process requirements.
Adopt double comma Blade Coating head and three independent temperature zone drying system, film accuracy up to +/- 0.005mm, drying temperature up to 250 ℃, equipped with full servo tension control and automatic deviation correction system, realize fully automated precision Spreader process from unwinding to rewinding
Using scraping method to achieve 0.005-3mm wet film thickness, Spreader accuracy of +/- 5%, equipped with hot air circulation Oven and automatic constant tension control to ensure Spreader uniformity and Stability.
The width is 5cm, the optical path is 10mm, and the dimensions are 12.5 × 52.5 × 45mm, which is suitable for the use of Spectrophotometer to ensure Optical inspection detection accuracy.
Using photoelectric detection and microcomputer servo system, high Sensitivity, minimum reading +/- 0.005 °, Repeatability ≤ 0.007 °, low optical rotation samples with measurable transmittance ≥ 10%, no reading error.
