The stainless steel material is acid and alkali corrosion resistant, the application width is 50mm, and it can be operated without adjustment to ensure that the film is flat without defects such as orange peel and brush marks.
Wet film thickness 60 microns, total length 375mm, application width 255mm, wire-wound process to ensure uniform film, stainless steel material is durable, matching Drawdown Plate to enhance repRoducibility.
Adopt stepper motor to achieve stepless speed regulation of 1~ 500mm/min, equipped with 500N force value Measurement range and +/- 1% accuracy level, with overload protection and limit protection functions, stable and reliable operation.
Using imported cold light source and narrow-band interference technology, the detection limit is 0.05mg/L, supports continuous measurement and standard Measurement mode, and the built-in large-capacity lithium battery can store 4000 sets of data.
Using precision screw pair and servo motor drive, the test speed range is 1~ 500mm/min, the effective stroke is 800mm, with overload protection and limit protection functions, and the operation is stable and reliable.
Maximum load 50Kg, Test speed 10~ 60mm/min adjustable, using pointer sensing mode, effective Travel 0~ 360mm, suitable for vertical angle disbonding test.
With 0.5 accuracy and 200kg capacity, it supports a variety of disbonding tests such as 180 ° and 90 ° disbonding, automatically records Linear dispersion and analyzes MAX Maximum, MIN Minimum and Average for a variety of material inspections.
Measurement accuracy of 0.5 with High Accuracy Sensor, speed range 5~ 500mm/min, support automatic Linear dispersion analysis and multi-point data collection, tensile, tear and disbonding tests.
With 0.5 levels of accuracy and a speed range of 5-500mm/min, it supports automatic drawing of disbonding Linear dispersion and calculation of interval results, and can resolve MAX Maximum, MIN Minimum and Average for a variety of material tests.
With 0.5 accuracy and 5~ 500mm/min speed adjustment range, it supports automatic drawing of disbonding Linear dispersion and calculation of interval results. It can distinguish MAX Maximum, MIN Minimum and Average, and effectively Travel up to 400mm.
The High Accuracy Sensor is used to achieve 0.5 level Measurement accuracy, supports 5~ 500mm/min speed range, and is equipped with automatic Linear dispersion analysis function, which can calculate interval results and distinguish MAX Maximum, MIN Minimum and Average.
With 0.5 accuracy and 5~ 500mm/min speed range, using High Accuracy Sensor and stepper motor control, support automatic Linear dispersion analysis and multi-interval result calculation, effective Travel up to 400mm.
Impact angle of 90 °, can test 5 groups of specimens at the same time, the minimum reading value is 0.005 kg-cm, the mechatronics design is compact, and meets the requirements of many international standards.
With 0.5 accuracy and 50kg Maximum capacity, it supports a speed range of 5~ 500mm/min, automatically plots disbonding Linear dispersion and calculates interval results, suitable for tensile and tear testing of a variety of materials.
Precision ball screw drive system, Force Measurement range 0.005-30N, Accuracy grade 0.5, equipped with 5-inch high definition Touchscreen and intelligent operation function, support a variety of unit selection and USB data export.
