Pump-suction sampling and imported Electrochemical sensor, Response Time ≤ 20 seconds, resolution 0.01ppm, support 1-5 Sensor expansion, IP65 Protection Rating, suitable for harsh environments.
Equipped with 2.4-inch high definition color screen, supports 1-6 Sensor expansion, with 4-20mA and RS485 output, Response Time ≤ 20 seconds, Protection Rating IP65, suitable for harsh industrial environments.
Imported high luminance Illuminant and narrow band filter system, Optical inspection stability ≤ 0.002A/20min, measurement range 0.20~ 10.0mg/L, large screen Chinese display, data can be stored for a long time.
Adopt fan speed control to improve temperature uniformity, automatically discharge water vapor without manual adjustment, temperature control accuracy +/- 0.5 ℃, support 1-9999 minutes timing and over-temperature protection functions.
The imported cold light source has a lifespan of 100,000 hours, a detection limit of 0.1mg/L, supports continuous measurement and standard Measurement mode, and a built-in large-capacity battery can store 4000 sets of data.
Platinum Sensor provides linearly stable measurement results, Conductivity Detector cell constant K = 10, Measurement range 0 to 200mS/cm, suitable for high Conductivity Detector liquid detection.
Using photo paper smooth surface combination technology, observing the imprint after applying a uniform load, the pressure range of the probe is 50-250N, and the diaMeter of the rubber probe is Φ 40mm, which can accurately evaluate the chalking grade of the paint film.
Conductivity Detector cell constant K = 0.1, built-in temperature sensor real-time sensing sample temperature, suitable for low Conductivity Detector liquid measurement.
Vacuum principle measurement paper breathability performance, Measurement range 0-1000ml/min, test area of 10cm ², suitable for a variety of industrial paper mass detection.
Using MCU chip to achieve low power consumption operation, detection error ≤ +/- 3% F. S, Response Time ≤ 30 seconds; with flameproof structure and a variety of signal output, support remote monitoring and customized range, through a number of international safety certifications.
Made of anodic oxidation aluminum, with a test area of 10cm ² and a capacity of 16cm ³, equipped with non-swirl/spin sealing rings and level indicators, and supports both wet Cup method and cheering method test procedures.
The non-swirl/spin sealing ring design ensures test sealing, equipped with a horizontal indicator and a width support ring for easy operation, the test area is 25cm ², the capacity is 40cm ³, and the anodic oxidation aluminum material guarantees durability and easy cleaning characteristics.
Using platinum sheet material, Conductivity Detector cell constant is 10, suitable for high conductivity environment water measurement, equipped with three core socket interface, no temperature compensation design.
Using platinum sheet material, Conductivity Detector cell constant 0.1, no temperature compensation function, suitable for pure water and ultra-pure water and other water quality measurement, optional Glass flow Tank.
Using platinum sheet material, Conductivity Detector cell constant is 1, Measurement range covers 2.0~ 200 µS/cm, suitable for conventional water detection, interface is three-core socket, no temperature compensation function.
