CATEGORIES

    Hexagonal wet film comb

    Overview Products Knowledge Terms
    A hexagonal wet film comb is a hexagonal metal plate with teeth of varying heights, used to measure the thickness of wet coatings. During use, the comb is pressed vertically into the undried coating, and the teeth that come into contact with the paint are observed. The thickness range of the coating can then be determined based on the height differences of the teeth. It is applied in the rapid monitoring of coating uniformity during the application of paint and ink.
    Selection
    When selecting, ensure the tooth height range covers common coating thicknesses, the stainless steel material prevents corrosion, and the tooth spacing is moderate to avoid paint adhesion. The hexagonal structure facilitates multi-angle measurements, and the tooth height markings are clear and easy to read. Choose an appropriate precision specification based on the actual fluctuations in coating thickness.
    type
    Maximum range
    Minimum scale
    precision
    material
    shape

    Terms

    Doctor Blade Film Coater
    Paint Film Hiding Power Tester
    Wire Bar Coating Machine
    Wet Film Thickness Gauge
    Adjustable Film Applicator
    Film applicator
    Laboratory Plate Coater
    Manual Coating Applicator
    Vacuum adsorption blade coating machine
    Multi-sided wet film applicator

    Instruments

    AMITTARI AC-3000 Hexagonal Wet Film Comb Wet film instrument Aluminum alloy 25~ 3000um
    AMITTARI AC-3000 Hexagonal Wet Film Comb Wet film instrument Aluminum alloy 25~ 3000um

    Using hexagonal aluminum alloy structure, Measurement range 25~ 3000um, Division 25~ 200um, Coating thickness can be measured immediately after construction, in line with GB/T1764 and other standards.

    $ 102.00
    YONGLIDA SHG-200 wet film thickness Gauge Wet Film Comb stainless steel 20~ 200μm range
    YONGLIDA SHG-200 wet film thickness Gauge Wet Film Comb stainless steel 20~ 200μm range

    Made of stainless steel, the thickness is only 1.5mm, the range is 20~ 200μm, Division 20μm, the card design is convenient for quick measurement of wet-film Coating thickness on site.

    $ 119.00
    DUBAN DB10-2000 Wet Film Comb polygon wet film thickness measurement instrument
    DUBAN DB10-2000 Wet Film Comb polygon wet film thickness measurement instrument

    Polygonal structure design, range 25~ 2032µm, in line with GB/T1764-79, GB/T134522-92, ISO 2808-74 standards, suitable for Paints, varnish and other Coating wet film thickness measurement.

    $ 106.00
    PUSHEN SHG 50-950 Comb type wet film thickness Gauge, stainless steel one-sided type range to 950μm
    PUSHEN SHG 50-950 Comb type wet film thickness Gauge, stainless steel one-sided type range to 950μm

    Made of precision stainless steel, with a range of 50 to 950 μm, the 10-step tooth design can accurately measure wet film thickness, ensure painting mass and avoid material waste.

    $ 109.00
    PUSHEN SHG 10-100 comb type wet film thickness Gauge, stainless steel unilateral type 10~ 100μm range
    PUSHEN SHG 10-100 comb type wet film thickness Gauge, stainless steel unilateral type 10~ 100μm range

    The stainless steel material is durable, the range is 10~ 100μm Division 10μm, the unilateral design is convenient for vertical pressing into the wet-film measurement, and the number of teeth 10 can accurately read the thickness value between the infiltrated and uninfiltrated teeth.

    $ 109.00
    PUSHEN SHG 20-200 Comb type wet film thickness Gauge, stainless steel unilateral type 20~ 200μm
    PUSHEN SHG 20-200 Comb type wet film thickness Gauge, stainless steel unilateral type 20~ 200μm

    Made of stainless steel, durable and repeatability; range 20~ 200μm, Division 20μm, step number of teeth 10, unilateral design is convenient for vertical pressing into wet-film measurement, in line with international standards.

    $ 109.00
    YONGLIDA SHG-100 wet film thickness Gauge Wet Film Comb 10~ 100μm range
    YONGLIDA SHG-100 wet film thickness Gauge Wet Film Comb 10~ 100μm range

    Made of stainless steel, the range is 10~ 100μm, Division 10μm, Dimension 65 * 36 * 1.5mm, suitable for Paints, varnish and other Coating Coating thickness measurement.

    $ 119.00
    TQC SP4000 wet film thickness Gauge, hexagonal precision Gauge, stainless steel material
    TQC SP4000 wet film thickness Gauge, hexagonal precision Gauge, stainless steel material

    Range 20-370 microns, accuracy 10 microns, stainless steel corrosion resistance, hexagonal design with 24 scales, suitable for different Coating thickness measurement.

    $ 231.00
    YONGLIDA SHG-700 wet film thickness Gauge Wet Film Comb Stainless Steel 250~ 700 microns
    YONGLIDA SHG-700 wet film thickness Gauge Wet Film Comb Stainless Steel 250~ 700 microns

    Range 250~ 700 microns, Division 45 microns, made of stainless steel, Dimension 65 * 43 * 1.5 mm, suitable for on-site construction environment.

    $ 119.00
    AMITTARI AC-2000 Four Corner Wet Film Comb 25~ 2032µm Range
    AMITTARI AC-2000 Four Corner Wet Film Comb 25~ 2032µm Range

    Adopting a quadrilateral structure made of aluminum alloy, with a range of 25 to 2032 µm and a Graduation of 25 μm, it can be quickly placed vertically on the coating surface to measure the thickness immediately, meeting a number of international measurement standards.

    $ 114.00
    YONGLIDA SHG-750 wet film thickness Gauge Wet Film Comb Stainless Steel 50-950 microns
    YONGLIDA SHG-750 wet film thickness Gauge Wet Film Comb Stainless Steel 50-950 microns

    Stainless steel material is sturdy and durable, with a range of 50-950 microns, Division 50 and 100 microns, and a compact shape of only 65 * 43 * 1.5mm, suitable for rapid measurement of wet film thickness on site.

    $ 119.00
    DUBAN DB10-3000 Wet Film Comb thickness measurement tool according to GB/T1764-79
    DUBAN DB10-3000 Wet Film Comb thickness measurement tool according to GB/T1764-79

    The polygonal design is easy to operate, with a range of 25 to 2032 µm, covering 36 thickness scales, conforming to GB/T1764-79 and other standards, suitable for rapid measurement in a variety of Coatings.

    $ 106.00
    PUSHEN SHG 250-700 Comb type wet film thickness Gauge, stainless steel unilateral type Range 250-700μm
    PUSHEN SHG 250-700 Comb type wet film thickness Gauge, stainless steel unilateral type Range 250-700μm

    Made of precision stainless steel, durable and repeatability; range 250-700 μm, Division 50 μm; in line with international measurement standards to ensure accurate painting thickness control.

    $ 109.00
    PUSHEN SHG 50-750 Comb type wet film thickness Gauge, stainless steel unilateral type 20 teeth Range 50-750μm
    PUSHEN SHG 50-750 Comb type wet film thickness Gauge, stainless steel unilateral type 20 teeth Range 50-750μm

    Made of precision stainless steel, durable and repeatability. Range 50-750μm, number of teeth 20, Division 25μm and 50μm, to meet the measurement needs of different painting methods.

    $ 109.00
    RDS 52 #3/8 Applicator Rod wire-wound stainless steel coating coating bar wet film thickness 118.9μm
    RDS 52 #3/8 Applicator Rod wire-wound stainless steel coating coating bar wet film thickness 118.9μm

    Wire-wound design, wet film thickness 118.9μm, diaMeter 9.5mm, stainless steel material, wear resistance and corrosion resistance, suitable for preparing specific film thickness wet-film.

    $ 167.00

    Articles

    Laboratory rod coater for submicron wet film preparation of photoresist.
    This article introduces the process of using a laboratory bar coater to prepare submicron wet films of photoresist.
    Application of Wet Film Wheel Gauge in Continuous Measurement of Wet Film Thickness for Large-Area Coatings
    The wet film wheel gauge is a mechanical tool used to measure the thickness of wet coatings, operating based on the geometric relationship of three coaxial disks (two parallel outer wheels on the sides and an eccentric inner wheel in the middle).
    Operating specifications for on-site measurement of coating wet film thickness using wet film combs
    This article introduces the operational standards for on-site measurement of coating wet film thickness using a wet film comb gauge. First, it explains the measurement principle of the wet film comb gauge, which involves estimating the thickness by observing the extent to which the teeth of the gauge are coated with the paint.
    Selection of wet film thickness gauge range and accuracy requirements for comb teeth spacing.
    When selecting a wet film thickness gauges, the key considerations are the measurement range and the accuracy of the comb teeth spacing. The range should cover the coating thickness with a slight margin to avoid being too small for measurement or too large, which could reduce resolution.
    Wet film thickness gauge measures the wet film thickness of varnish.
    The wet film thickness gauge is a mechanical tool used to measure the thickness of liquid varnish coatings. It operates by rolling the gauge so that the tips of its teeth contact the substrate and leave marks. The thickness value is then obtained by the operator reading the scale of the first tooth that becomes coated with the varnish.
    Wet film applicator for applying color paint to a specified wet film thickness.
    A wet film applicator is a laboratory tool used to apply a predetermined thickness of wet paint film onto a flat substrate, providing the foundation for subsequent dry film performance testing.
    Operating Specifications and Result Interpretation of Paint Fineness Gauges
    The fineness gauge is used to measure the dispersion of particles in paint. During operation, the sample should be applied to the groove under standard conditions, and a scraper is used to spread it evenly to form a wet film. The particle visibility is then observed under appropriate lighting, and the fineness value is read from the corresponding scale.
    Application of Two-Step Method with Pre-Coating and Fine-Coating in Eliminating Bubble Defects for Dual-Blade Coater
    The dual-blade coater employs a two-step method of pre-coating and precision coating to eliminate bubble defects during the coating process. In the pre-coating stage, high shear force is applied to break the bubbles in the slurry, causing them to rupture and rise to the surface. The precision coating stage then precisely controls the coating thickness, removing any remaining bubbles to form a uniform wet film.
    Key Points for Controlling Coating Longitudinal Uniformity with Manual Rod Coater Constant Speed Dragging Techniques
    This article discusses how to control the longitudinal uniformity of the coating by dragging at a constant speed when using a manual wire rod coater. A constant-speed drag is crucial, as it directly determines the consistency of the wet film thickness.
    Key Points for Wet Film Thickness Control in the Preparation of Fluorocarbon Coatings for Photovoltaic Backsheets Using Automatic Film Coating Machines
    This article introduces the key points of controlling wet film thickness in the preparation of fluorocarbon coatings for photovoltaic backsheets using an automatic coating machine. Wet film thickness directly affects the performance and uniformity of the coating after curing, making its control crucial.
    Derivation and Validation of the Quantitative Relationship between Wire Diameter and Wet Film Thickness in Wire Wound Coating Bars
    This paper investigates the relationship between the wire diameter in a wire-wound rod coater and the wet film thickness. Theoretically, under ideal conditions, the wet film thickness is approximately half of the wire diameter.
    The correct method for using a wet film thickness gauge.
    The wet film thickness gauge is used to measure the thickness of uncured coatings. It determines the value by reading the scale through contact with the wet film using a toothed structure, which is crucial for controlling dry film thickness and estimating material usage.
    Control of Wet Film Thickness—Field Operation Comparison Between Wheel Gauge and Comb Gauge
    This article compares two tools for measuring wet film thickness: the wheel gauge and the comb gauge. When selecting a tool, factors such as coating characteristics, application environment, and precision requirements must be considered. Additionally, proper operation and environmental influences should be taken into account to ensure coating quality.
    Rapid Assessment of Paint Hiding Efficiency by Minimum Wet Film Thickness Method
    This article introduces a method for rapidly evaluating the hiding efficiency of coatings—the minimum wet film thickness method. Traditional methods are time-consuming, whereas this approach quantifies hiding power by measuring the minimum wet film thickness required for the coating to completely hide the substrate, making it simple and quick to operate.
    Coating film preparation techniques: comparison between wire-wound applicators and wet film preparators
    This article compares two commonly used tools in laboratory coating film preparation: the wire rod coater and the wet film applicator.