Spreader can be 30/60/90/120μm four thicknesses at the same time, using a combined quadrilateral structure, application width 160mm, stainless steel material to ensure durability and accurate film effect.
Effective Spreader width 100mm, wet film thickness up to 600μm, high-quality wear-resistant corrosion-resistant alloy steel material, support manual film or with automatic Film Applicator to ensure good conformity Repeatability coating.
Wire-wound structure ensures 0.1 micron High Accuracy, wet film thickness 50.3 μm, stainless steel material is durable and easy to clean, and the wide-Rod Film Applicator achieves uniform coating.
Spreader width 100mm, wet film thickness 37.5μm, wear-resistant corrosion-resistant alloy steel material, can be used manually or with automatic Film Applicator to ensure coating conformity and Repeatability.
Spreader width 100mm, wet film thickness 50μm, wear resistant corrosion resistant alloy steel material, suitable for manual or automatic Film Applicator, can be prepared uniform film for performance testing.
The combined quadrilateral design, the number of film grooves is 4, the film thickness can be 50/100/150/200μm, the total length is 190mm, suitable for a variety of thickness Spreader needs.
Spreader width 100mm, wet film thickness 60μm, high-quality wear-resistant corrosion-resistant alloy steel material, manual film can also be equipped with automatic Film Applicator, support non-standard customization.
Providing 77.7μm wet film thickness and 300mm application width, the formed process ensures uniform film, suitable for Spreader requirements of a variety of liquid materials.
Manufactured by a formed process, the wet film thickness is 96.0 μm, the application width is 30mm, and the total length is 40mm.
Stainless steel material ensures durability, wet film thickness range of 300-600μm, accuracy +/- 4μm, suitable for low viscosity liquid Spreader, can be combined with Automatic Film Applicator to achieve uniform Spreader.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
Using electronic engraving technology to form a quadrilateral pyramid-shaped net hole structure, the number of lines 180LPI is inversely proportional to the wet film thickness, the width of the print surface is 70mm, and the surface chrome plating enhances the wear resistance and anti-corrosion performance.
Adopting a quadrilateral structure made of aluminum alloy, with a range of 25 to 2032 µm and a Graduation of 25 μm, it can be quickly placed vertically on the coating surface to measure the thickness immediately, meeting a number of international measurement standards.
Spreader width 100mm, wet film thickness 400μm, wear-resistant corrosion-resistant alloy steel material, can be used manually or with automatic Film Applicator, suitable for preparing uniform film coating to test performance.
Spreader width 100mm, wet film thickness 100μm, wear-resistant corrosion-resistant alloy steel material, can be manually operated or used with automatic Film Applicator, suitable for a variety of materials to prepare uniform film.
