Micro vibration technology implementation of real-time online measurement, range 0~ 50~ 100mpa.s, accuracy +/- 0.5%, Response Time 2 seconds, suitable for a variety of fluid media.
With PH/ORP measurement function, Measurement accuracy up to +/- 0.02pH, support temperature automatic compensation and manual compensation, provide high and low limit alarm dual relay, isolated transmitter port maximum loop resistance greater than 300Ω.
Equipped with 6.3:1 continuous zoom ratio and 115mm standard working distance, it supports large field of view flat image surface, adjustable binocular visibility, and comfortable operation of the zoom handwheel bilateral setting, suitable for long-term use.
With Humidity continuous automatic correction function, effectively reduce Humidity interference; Measurement range 0.001-100mg/m ³, support TSP, PM10, PM5, PM2.5, PM1.0 multi-cutter compatibility, built-in filter membrane sampling device to achieve continuous monitoring and sampling.
Using 0.8X~ 5X continuous zoom objective, the zoom ratio is 6.3:1, the working distance of 115mm can be extended to 211mm, providing large field of view flat image surface and binocular visibility adjustment, and the operation is comfortable and high accuracy.
Adopt 0.7X~ 4.5X continuous zoom objective, total magnification 7~ 45X, working distance 100mm, can be extended to 287mm; with high eye point and large field of view eyepiece and bilateral zoom handwheel, the operation is comfortable and high accuracy.
Using 0.7X-4.5X continuous zoom objective, the total magnification is 7~ 45X, the standard working distance is 100mm, providing flat image plane and good contrast ratio positive image, and long-term use without fatigue.
Using 0.8 × -5 × continuous zoom objective lens, the zoom ratio is 6.3:1, the standard working distance is 115mm, providing a flat image plane and a good contrast ratio positive image, and the binocular visibility is adjustable, which conforms to ergonomic design.
Micro vibration technology implementation of real-time online measurement, range coverage of 0-5~ 50-5000pa.s, accuracy of +/- 0.5%, temperature 500 ℃ and Response Time only 2 seconds, suitable for high temperature and high voltage conditions.
With +/- 1000mV wide range measurement and manual two-point Adjustment, support automatic diagnosis ElectRode status and fail-safe alarm system, effectively prevent signal interruption problems.
The laser light scattering principle to achieve rapid measurement, detection sensitivity of 0.001mg/m ³, with online automatic mechanical Adjustment, built-in optical path self-cleaning system to avoid contamination of core components, support a variety of cutter selection.
Fast measurement using laser light scattering principle, with online automatic mechanical Adjustment, Measurement range 0.01-100 mg/m ³, built-in optical path self-cleaning system to avoid pollution, support a variety of cutters and sampling modes.
Measurement range of +/- 1000mV, equipped with large LCD display with background light, support manual two-point calibrating and automatic diagnostic function, can verify calibrated status and ElectRode status, fail safe alarm system to improve operational Reliability.
Imported High Accuracy Electrochemical sensor, detection limit up to 0.001ppm. Support 4-20mA, RS485 and other signal output, with overvoltage, lightning protection, short circuit and other multiple protection and automatic recovery functions.
With 3000 times/min and 6000 times/min two vibration frequencies, the amplitude can be continuously adjusted between 0mm and 3mm, supporting three modes of subtle vibration, intermittent vibration and continuous vibration, suitable for ≤ 325 mesh material analysis.
