Measurement range 20-90HC, resolution 1HC, Indication Error ≤ +/- 1HC, suitable for microporous hardness of materials testing.
The pressure spring constant linear relationship, pressure needle Travel 0-2.5 mm, measurement error +/- 1HC, can be hand-held or installed measuring frame, suitable for shoe microporous hardness of materials testing.
Measurement range 0~ 100HC, error +/- 1HC, suitable for the detection of microporous materials with stress above 0.049MPa when the compression rate is 50%.
Suitable for medium hard resilience, rubber or microporous materials, Measurement range 0-100HE, more suitable for thinner or curved samples, can be used with handheld or supporting bench.
The pressure spring is used to achieve a constant linear relationship, the pressing needle Travel 0-2.5 mm, measurement error +/- 1HC, can be used in hand or installed on the measuring rack, suitable for the test of microporous materials for shoes.
Equipped with dedicated host computer software to realize data storage analysis, support peak mode and automatic Timing function, Measurement range 20-90HC, resolution 0.1HC, with a variety of coordinate Linear dispersion display and qualified judgment ability.
Suitable for the determination of materials with high Hardness, Measurement range 20-90HD, Indication Error ≤ +/- 1 HD, using Dial display, easy to operate, suitable for rubber and plastic and microporous materials.
Suitable for materials with Hardness > 90HA and < 20HD, especially for thin or curved samples. Measurement modes of real-time, peak, automatic timing and average value, force retention time can be set, and data Linear dispersion analysis and qualification judgment can be carried out by the host computer software.
Imported special steel pressure needle, Hardness and long life, range 0-20HW, can directly read the Hardness value, suitable for on-site rapid testing, Stability and portability.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
It adopts 45 ° fixed angle design, loads 1000g +/- 10g, and evaluates Hardness by scratching coatings with different Hardness pencils, which is easy to operate and accurate.
Compact and lightweight can be operated with one hand, without support and testing experience, the test range is equivalent to brinell hardness 25~ 150HB, can measure a variety of Hardness scales and has MAX Maximum hold and average calculation functions.
Adopt four-link mechanism to ensure a constant 45 ° test angle, equipped with 500/750/1000g adjustable load, accurately determine film Hardness through different Hardness pencil scratches, meeting standard test Environmental requirements.
The 45 ° fixed angle design is adopted to ensure that the cylindrical pencil lead maintains a constant angle and pressure, the load is 500g, the error is +/- 10g, and the coating Hardness level is determined by the minimum Hardness value pencil trace.
Adopt 45 ° test angle and adjustable load system, the test platform traverse speed 0.5-10 mm/s adjustable, equipped with LCD display real-time monitoring, to meet the needs of accurate coating Hardness detection.
