Using split Probe design, Probe can be plugged and interchanged, Measurement accuracy of +/- 2% H + 1 μm, high wear-resistant carbide Probe service life of more than 500,000 times, support a variety of Calibration methods and data statistics.
Sharp probe measurement without leaving marks, measurement range 6%~ 90%, support wood moisture content and wood humidity equivalent value display, equipped with extended Probe and hammer ElectRode for different depth measurement.
With split design, Probe can be plugged and interchanged, and the service life of high wear-resistant cemented carbide Probe exceeds 500,000 times. Measurement range 0-5mm, accuracy up to +/- (2% + 1μm), can accurately measure thin coatings within 10 microns.
With split Probe design, Temperature Measurement range covering -10~ 50 ℃, can be extended to 1000 ℃, Humidity Measurement range 5~ 98% RH, error +/- 1.5 ℃ and +/- 5%, support unit conversion, portable and durable.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-1250μm, support split probe flexible replacement, with automatic identification of matrix material function, minimum measurable surface radius 1.5mm.
With split Probe design, equipped with F and N Probe, Measurement range 0~ 1500 microns, resolution 0.1 microns, automatic identification of substrate type, support for more than 60 readings per minute, Protection Rating IP65.
Sensor and host split design, measurement range 3-80%, accuracy +/- 0.5%, support 37 kinds of grain type measurement, with temperature and humidity compensation function, Response Time is only 1 second, Portable structure is convenient for on-site rapid detection.
Split structure is easy to carry, supports free conversion of six Hardness units, can store 50 sets of test data, Measurement range 200~ 900HLD, with RS232 interface and backlight display function.
Using split Sensor design, temperature range -20~ 60 ℃, humidity range 10~ 95% RH, Sampling rate 0.4 seconds, with MAX Maximum hold and automatic shutdown function, compact and easy to carry.
Using split Sensor design, Temperature Measurement range -10~ 50 ℃, Humidity Measurement range 5~ 98% RH, support ℃/F unit conversion, resolution up to 0.1 ℃ and 1% RH.
With 1-200000Lux wide range automatic switching function, Sampling rate 2 times/second, Response Time 1 second, support Lux/Fc unit display, portable split design for on-site detection.
Using split Sensor design, Temperature Measurement range -10~ 50 ℃, Humidity Measurement range 5~ 98% RH, support ℃/F unit conversion, equipped with 9V battery power supply.
The split structure can measure pipes with an inner diaMeter greater than 40mm, equipped with a 3.5-inch color Touchscreen, supports a Ra Measurement range of 0.005-32μm, and has Bluetooth interconnection and various Linear dispersion analysis functions.
Using split Sensor design, the temperature range covers -50~ 70 ℃, Humidity Measurement range 20%~ 99% RH, supports ℃/F unit conversion, which is convenient for indoor and outdoor environment monitoring.
Glass transmittance measurement is facilitated by split dual-machine design, integrated UV-IR-VIS 3-in-1 test function, equipped with laser alignment to ensure measurement accuracy +/- 2%, and supports built-in lithium battery power supply.
