Film thickness 0.3mm fillet Perforating design, easy to paint adhesion, hardness, Impact and other performance tests, about 70 pieces per kilogram to meet the needs of batch experiments.
Double-sided uniform tin plating, surface mass I, Hardness T52, standard thickness 0.28mm, provide crimping listening plate, rounded corners with or without holes and other specifications, single batch pRoduction of 10w sheets.
Size 70x130mm Film thickness 0.3mm, rounded corners Perforating design is convenient for coating performance testing, suitable for adhesion, hardness, Impact and other film testing scenarios.
Film thickness 0.3mm fillet Perforating design, suitable for coating adhesion, hardness, Impact and other performance testing, to ensure that the film preparatory smooth and stable.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
Size 100x150mm, Film thickness 0.3mm, rounded corners Perforating design for easy fixing and operation, suitable for a variety of industrial coatings performance testing, to ensure the accuracy of film testing and repeability.
The bending diaMeter of putty film cracking peeling is tested by bending test plate, and the shaft Rod size is 50mm and 100mm. It is suitable for 0.2-0 mm thick tinplate substrate, and the operation is simple and reliable.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Using double-sided uniform tin plating process, the surface mass reaches class I, Hardness T52, standard thickness 0.28mm, to ensure accurate and reliable film test results.
Equipped with three standard thickness templates (1 +/- 0.05, 0.7 +/- 0.035, 0.5 +/- 0.03), the membrane frame is fixed by spring compression column, which can be prepared for performance testing.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Made of stainless steel, the cutter tooth spacing is 1mm, with a total of 11 teeth, ensuring uniform cutting and durability. It is suitable for precision paint film testing.
