Range 10kN, accuracy ≤ +/- 1.0% F.S, using mechatronics design, weight only 2.8kg, handle operation labor-saving, can directly display the strength value and have automatic shutdown function.
4 groups of samples can be tested at the same time, using PID temperature control accuracy of 0.1 ℃, support segmented program heating, one key automatic calculation of carbon black and ash content, open the lid structure heat dissipation fast.
Electric Circle-drawing is used to ensure uniform speed and constant strength, Travel 20-80mm adjustable, Rotation speed 10-120 +/- 1 rpm adjustable, equipped with automatic judgment prompts and precision dual rail system to improve test Repeatability and data accuracy.
4 groups of samples can be tested at the same time, using PID precise temperature control technology, Temperature range from room temperature to 1000 ℃, with automatic calculation of carbon black content and ash content function, open lid structure heat dissipation effect is better.
The highest temperature is 1400 ℃, the Furnace volume is 4.5L, and the aluminum oxide fiber Furnace and silicon carbon Rod heating elements are used to support the inert gas environment and ensure the uniform and stable sintering of the material.
Adopt S-type Tension Sensor to Ensure High Accuracy, Built-in Micro Hydraulic System, Support Strength and Force Measurement modes, Continuous Operating Time over 200 hours, Range 0~ 10KN.
Using mechatronics design, equipped with High Accuracy S-type Sensor and screw structure, the range is 0~ 10.000KN, the resolution is up to 0.001KN, 500 pieces of data can be stored and 10 segments of fold line correction can be supported.
Adopting manual sprocket drive structure, Working Travel ≥ 80mm, equipped with four weight combinations, accurate drawing is achieved through replaceable 808 stylus, and different diaMeter graphics are supported.
The steel stylus is used for precision drawing, the diaMeter range is 0-10.5 mm, and it is equipped with multiple sets of weights to achieve accurate loading.
The thermal weight loss method is used to measure carbon black content, the operating temperature can reach 990 ° C, and the 7-inch Touchscreen is equipped to realize one-button calculation, support segmented paraMeter setting, and the Furnace body separation design has better heat dissipation.
Ceramic fiber Furnace to achieve multi-faceted heating, Temperature uniformity less than +/- 5 ℃, heating rate ≥ 10 ℃/min, with nitrogen filling device to slow down oxidation and flue discharge of harmful gases.
The device uses mechatronics design, weight only 3.5kg easy to carry; equipped with High Accuracy S type Sensor, accuracy of 0.5% F.S; support 0.1-50 mm/min adjustable drawing speed, built-in lithium battery for outdoor use.
Using electrochemistry principle to detect carbon monoxide, with a range of 0~ 1000ppm, with four Alarm modes and wireless data transmission functions, support temperature compensation algorithm and a variety of usage methods.
Adopting frequency conversion stirring technology, the impeller Rotation speed can be adjusted from 1000-3600rpm, and supports two test modes of counting and not counting to ensure that the fiber retains its original structural properties during the wet dissociation process.
Pottery and porcelain fiber Furnace and multi-faceted heating technology, Temperature Fluctuation +/- 2 ℃, energy saving rate of 40%, with 30 program settings and over-temperature protection function.
