Slot-die Spreader technology implementation of 0.005-3mm thickness precision control, composite roller heating temperature up to 200 ℃ to ensure firm gluing, equipped with 1 Meter drying tunnel and stepping motor to achieve 1-10m/min stable operation.
Slot-die Spreader technology implementation of 0.005-3mm thickness range of precision Spreader, composite roller heating temperature up to 200 ℃ to ensure firm gluing, servo motor control to achieve 0.001-10m/min stepless speed regulation, equipped with 1 Meter drying tunnel to achieve efficient drying curing.
Using Slot-die Spreader technology, the thickness range of Spreader is 0.005-3mm, the bonding speed is 1~ 10m/min, and the drying temperature can reach 200 ° C. It is suitable for a variety of non-elastic materials to achieve accurate Spreader and efficient compounding.
Using slot-die coating method, application width ≤ 500mm, thickness range 10-250μm; equipped with automatic deviation correction and constant tension system, Oven temperature RT +~ 160 ℃, support segmented thermostatic, ensure Spreader accuracy +/- 3 microns.
Slot-die Spreader and gravure coating dual function design, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, bonding accuracy of 0.5mm, suitable for a variety of non-elastic materials stable composite and Spreader processing.
Driven by stepper motor, folding speed 10-200cpm, adjustable test angle 10-180 °, with automatic counting and disconnection automatic stop function to ensure Test accuracy.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Stepping motor drive to achieve High Accuracy positioning, test angle 10~ 180 degrees adjustable, folding speed 10~ 200cpm can be set, with automatic counting and disconnection automatic stop function.
Made of stainless steel, with a slot width of 12mm and Graduation of 2.5μm, the single-channe design is easy to operate and suitable for particle fineness testing.
Spreader thickness range of 10-250μm, Dry-Film accuracy of +/- 3 microns, equipped with automatic constant tension control and four Oven section thermostatic, ensure uniform and stable Spreader, Oven with waste heat recovery system energy saving about 30%.
The application width can be adjusted freely, and the drawdown blade Coater can be adapted to meet different experimental testing needs and realize flexible film operation.
Spreader thickness accuracy of +/- 0.003mm, adjustable rate of 5~ 200mm/s, support Vacuum chuck and heating to 180 ℃, suitable for a variety of substrates and laboratory environments.
Adopt double comma Blade Coating head and three independent temperature zone drying system, film accuracy up to +/- 0.005mm, drying temperature up to 250 ℃, equipped with full servo tension control and automatic deviation correction system, realize fully automated precision Spreader process from unwinding to rewinding
Adopt High Accuracy Modular Spreader Station, all-electric control without external air source, Spreader thickness can reach a minimum of 0.01mm, maximum Spreader width of 300mm, and equipped with quick-release plastic slot for easy cleaning and maintenance.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
