Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
Four-channel configuration with K-type Thermocouple, the sampling rate can be adjusted from 1 second to 1 minute, and the thermal insulation performance can last for 60 minutes in a 500 ° C environment to achieve full temperature tracking monitoring.
Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
Using S-type Sensor structure, Measurement accuracy of +/- 0.5%, with 10 data storage and automatic calculation functions, support for automatic conversion of N/kgf/lbf units, peak hold and automatic release functions can be freely set time.
Using S-type external Sensor, Measurement range 10%~ 100% FS, Indication Error less than +/- 0.5%, with peak hold and automatic unit conversion function, support Data storage and sound and light alarm settings.
The dual-channel interface can connect two Probes at the same time, support K-type -200~ 999.9 ℃ wide range, with low power error-proof system and data locking function, waterproof design to adapt to a variety of environments.
High Accuracy S type sensor accuracy of 0.5%, range 0-10KN, with pull-off automatic stop function, three operation modes optional, can directly enter the test block area display force value and strength value
Adopt DSP chip to realize fast data processing, support Multi-ParaMeter measurement such as Ra, Rz, etc., equipped with TYPE C and Bluetooth interface for data transmission, Continuous Operating Time exceeds 20 hours, and stores 100 sets of data.
Using S-type Sensor structure, Measurement range 10% -100% FS, Indication Error less than +/- 0.5%, with peak hold, automatic alarm and Data storage functions, support Linear dispersion test and machine linkage control.
Four-channel K-type Thermocouple with 0.5% accuracy, the insulation box can work continuously for 1 hour in a 300 degree environment, supports multi-rate sampling and 16000 Data storage, Stability is high and easy to operate.
With 4-channel K-type Thermocouple, Measurement range -100 to 1300 ℃, accuracy +/- 0.3 ℃. Support continuous test 16 times, automatic charging when data is downloaded, and data is not lost after power failure, easy and intuitive operation.
Using irreversible discoloration, single temperature 80 ℃, diaMeter 1.5 cm circular design, suitable for indoor use, no anti-fouling protective film.
Using fixed K type stainless steel penetration type temperature sensor, Response Time 20 seconds, temperature range coverage -50.0 to 300 ℃, in line with IP65 waterproof standards, to ensure stable work in harsh environments.
4-Sided wet-film Spreader design, application width 160mm, accuracy +/- 2μm, high Hardness stainless steel material, Hardness 50~ 55HRC, to ensure experimental accuracy and durability.
Using irreversible discoloration method, each piece is a single temperature, 1.5 cm in diaMeter, suitable for indoor use, providing a variety of temperature options such as 60 ° C, 70 ° C, 80 ° C.
