Moisture and Heat Resistance Tester

The damp heat test apparatus generates saturated steam by heating a water tank to simulate high-temperature and high-humidity environments. Test samples are placed in a sealed chamber and subjected to specified temperature and humidity conditions to evaluate properties such as aging resistance, discoloration, and deformation. It is used for quality verification of coatings, plastics, and textiles in humid and hot environments.
Selection
When selecting, pay attention to a temperature range covering 40-100℃ and humidity control above 98%. The inner chamber material should be corrosion-resistant stainless steel, with an adjustable sample rack. It should feature over-temperature protection and a timer function. Check the inner chamber dimensions to match the sample quantity and confirm compliance with standards such as GB/T1740.

Standards

Instruments

Temperature range -40~ 150 ℃, Humidity range 20~ 98% RH, with multi-stage program editing and fast slope control function, double-decked air tight and sweat-proof viewing window design.

$ 5237.00

Temperature range of -40~ 150 ℃ and 20~ 98% Humidity control, anti-condensation design of laminated Glass viewing window, support multi-stage program editing and fast slope control, meet a variety of standard test requirements.

$ 9271.00

Using resistance principle and temperature and humidity compensation technology, the measurement range is 3-80%, the accuracy is +/- 0.5%, the Response Time is 1 second, the portable and lightweight is only 203 grams, suitable for on-site rapid detection.

$ 138.00

Measurement principle using resistance method, Measurement range 2~ 70%, accuracy +/- 2%, Response Time only 1 second. With 4 wood Measurement modes, support Data storage and voice reminder function.

$ 94.00

Measurement principle using resistance method, accuracy of 0.1%, support a variety of grain Measurement range, with voice reminder and automatic shutdown function, portable design weighs only 254g.

$ 90.00

Ring quartz tungsten halogen infrared Heating mode is used to directly heat from the inside of the material, and a unique temperature control system is used to achieve uniform heating. With 0.02% moisture Readability and 50g weighing capacity, real-time monitoring of moisture changes ensures accurate results.

$ 330.00

Using resistance principle and temperature and humidity compensation technology, the measurement range is 3-80%, the accuracy is +/- 0.5%, 25 kinds of special gears for grain, the integrated design is easy to carry, and the Response Time is only 1 second.

$ 165.00

Measurement principle of resistance method, accuracy of +/- 1%, equipped with 610mm detachable long probe, can measure different depths of grain moisture, support voice broadcast and a variety of function settings, suitable for a variety of grain moisture detection.

$ 97.00

Measurement principle using resistance method, Response Time only 1 second, Measurement accuracy +/- (1% RH + 0.5), support 4 wood measurement types, with automatic shutdown and low power prompt function.

$ 89.00

Measurement principle using resistance method, Measurement range 2~ 70%, resolution 0.5%, Response Time only 1 second, with voice reminder, automatic shutdown and Data storage function, Operating temperature 0~ 40 ℃.

$ 93.00

The annular halogen lamp is used to heat the sample evenly and quickly, and the surface is not easily damaged. Capacity 100g, moisture measurement range 0.00~ 100%, and the general sample can be measured in a few minutes.

$ 388.00

Using an annular halogen lamp to heat uniformly, the sample is rapidly dried in just a few minutes, the moisture measurement range is 0.00 to 100%, and 9 paraMeters including water loss rate and temperature can be displayed.

$ 344.00

Using halogen lamp heating source, moisture temperature accuracy +/- 0.5%, moisture readability 0.02%~ 0.1%, heating temperature range 50 ℃ to 180 ℃, support timing automatic end measurement, with RS232 communication interface.

$ 585.00

Using halogen lamp heating technology, fast drying samples and real-time display Moisture content, Moisture Precision up to +/- 0.2%, Heating Temperature range 80~ 160 ℃, suitable for a variety of sample detection.

$ 359.00

It is compacted by 14,000 tons of hydraulic press, with a density of 1.5-1 g/cm ³ and a flexural strength of air drying ≥ 21Mpa. It has A-class non-combustibility, sound insulation and heat insulation, water resistance and moisture resistance performance, convenient construction and green environmental protection.

$ 180.00

Articles