Double disc independent control can be operated by double person at the same time, the diaMeter of the throwing disc is 230mm, the Rotation speed is 900rpm, the transmission is stable and the noise is small, the operation and maintenance are convenient, and it is suitable for polishing requirements of various materials.
Double disc independent control can be used for double person operation at the same time, smooth transmission and low noise, throwing disc diaMeter 230mm, Rotation speed 650rpm or 800rpm optional, easy operation and maintenance.
Using reciprocating motion to simulate transportation abrasion, Friction Frequency 0~ 2.5Hz adjustable, Test Travel 12.7~ 50.8mm, support continuous test 0~ 24 hours, suitable for a variety of can sizes and pressure conditions.
Can test inks multi-directional adhesion at the same time, Friction Frequency 43cpm, Friction Load 2lb/4lb, Abrasion Resistance evaluation by measurement density or Coating thickness reduction, support 0-99999 automatic shutdown.
Double disc independent operation can be used by double persons at the same time, the diaMeter of the throwing disc is 230mm, equipped with a polishing water supply system and a drawer-type sewage collection box, the transmission is smooth and the noise is low.
Scruf Travel 20-300mm adjustable, speed range 1-60cpm, equipped with TFT full color display and intelligent Operating interface, supports manual testing and is compatible with a variety of standard accessories, suitable for coating Abrasion Resistance evaluation.
Double disc independent control can be operated by double person at the same time, the diaMeter of the throwing disc is 230mm, the Rotation speed is 900rpm, the transmission is stable and the noise is small, and the operation and maintenance are convenient.
Adopt reciprocating friction method, Friction Frequency 0~ 2.5Hz, Test Travel 12.7~ 50.8mm, can simulate coating abrasion during transportation, support continuous test 0~ 24 hours.
Using 1500W Power and 120mm dispersion disc, support frequency conversion speed regulation and continuous operation, servo brushless motor operation stable and efficient, dispersion disc corrosion resistance and removable replacement.
Double disc independent operation, Rotation speed 50~ 1400rpm stepless speed regulation, throwing disc diaMeter 230mm, equipped with water supply system and drawer type sewage box, smooth transmission and low noise.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
Equipped with an electronic display 6-bit counter to realize automatic shutdown, the test disc Rotation speed is adjustable from 0-70, and supports multiple types of abrasive wheels and loads of 250g to 1000g to meet the testing requirements of different material standards.
Using standard sand free fall brushing layer, straight grinding to expose 4mm substrate; can quantify the abrasion per unit thickness of the paint layer of sand volume, the inner diaMeter of the catheter 19mm, sample holder 45 degrees angle fixed.
Can set the moving distance 0.5-4 inches, Rotation speed 2-60 times/min and other paraMeters, support wet and dry abrasion test, can test any size or shape sample, ensure test Stability and accuracy.
