Measurement accuracy of +/- 1% and speed range of 0~ 300mm/min, support tensile, compression, bending, disbonding and other test modes, effective Travel 600mm to meet different material testing needs.
It is suitable for a variety of mechanical property tests such as tension, compression, bending, shear, tearing, peeling, and puncture. It supports multiple control modes including constant speed, fixed displacement, and constant force, enabling complex multi-step nested loop control, and features powerful data and curve analysis capabilities.
Maximum test force 50N, Accuracy grade 0.5, support tensile, compression, bending, shear and other test modes, with powerful Linear dispersion analysis and custom report functions.
Equipped with 2 to 12mm eight diaMeter stainless steel cylindrical mandrel, in the form of hinged bending, in line with GB6742 standard, suitable for Coating bending performance testing.
A bending angle is less than 45 degrees, can test 0.5~ 1.0mm Film thickness sample, flattening mechanism stroke is not less than 10mm, using crank lifting mechanism to achieve T-shaped bending test.
The gear pair and crank lifting mechanism are used to achieve accurate bending, the first bending angle is less than 45 °, the flattening mechanism Travel ≥ 10mm, which can test 0.5-2 mm thickness plates and support OT to T bend test.
The instrument is equipped with eight kinds of diaMeter stainless steel cylindrical mandrel, which adopts the form of hinge connection bending, which can accurately test the bending deformation of coatings under different diaMeters to ensure the test Reliability.
The test bending angle is less than 45 degrees, suitable for steel plate thickness 0.5~ 1.0mm and Aluminum Panel thickness 0.5~ 2.0mm. The gear pair and crank lifting mechanism are used to achieve T-shaped bending, which is easy to operate.
Can test 4 shoes at the same time, bending angle 0 °~ 90 ° adjustable, Test speed 0~ 140 times/min, with automatic return and LCD counter function.
Suitable for a variety of mechanical tests such as tension, compression, bending, shear, tearing, peeling, and puncture, supporting testing according to standards such as GB, ISO, and ASTM. It features servo motor drive and high-precision ball screws, offering high control accuracy, low noise, and multiple protection mechanisms for force, stroke, and displacement overloads.
Maximum load 100KN, suitable for bending testing of various materials, with high load-bearing capacity and Stability, to meet different testing requirements.
Maximum test force 20KN, Accuracy grade 0.5, support tensile compression bending shear and other test modes, using servo motor and precision ball screw drive, stable and reliable test.
With a bending angle of 135 degrees and a folding speed of 175 times per minute, it can apply a test load of 4.91N to 14.72N, and the automatic counting function accurately records the number of breaks, which is suitable for material durability testing.
It can measure three different angles at the same time, the angle range is adjustable from 1-92 °, the Measurement range is 0-10000mN, and it supports a variety of material tests with bending length and thickness 0.01-5 mm. It has automatic reset and self-Adjustment.
Using pure mechanical design, the coating performance is measured by conical mandrel bending test plate, the test plate size is 100mm × 180mm, the thickness is less than or equal to 0.8mm, and the operation is simple and reliable.
