Film thickness range 650~ 875 μ m, Graduation 25 μ m, stainless steel material, Dimension 120 * 22 * 20mm, suitable for the determination of relative sag of Paints.
With relative and absolute mV measurement function, Measurement range -999~ 999mV, accuracy +/- 2mV, support automatic end point locking and 1 point offset calibrating, fully waterproof design for use in harsh environments.
The device can measure the ability of Coating to eliminate surface defects, wet film thickness range of 250~ 4000 μm, groove depth coverage of 250 to 4000 μm, in line with international standards.
Measurement viscosity range 10~ 2X10mPa · s, stainless steel rotor and universal joint design, support manual speed regulation and 0.3-60 rpm multi-speed, with data storage function to ensure accurate and reliable measurement.
Measurement accuracy +/- 2mV with relative and absolute mV measurement function, Automatic endpoint locking retains stable Measured value, fully waterproof design can be used in harsh environments, built-in system menu supports custom data locking and timed shutdown.
500Ml capacity S6 viscosity standard oil, 20 ℃ viscosity 8.911mPa · s, 25 ℃ viscosity 7.498mPa · s, traceable to national standards, compatible with a variety of test equipment calibrating requirements.
Coating can measure the relative leveling of liquid, evaluate the ability to eliminate surface defects, Coating thickness range of 250~ 400 μm, groove depth coverage of 100 to 1000 μm.
Silicone oil standard liquid viscosity value 11000cp, capacity 400ml, specially designed for Viscometer calibrated, providing stable and reliable viscosity reference standards.
Using 6mm filter diaMeter, viscosity measurement range 188-684cSt, flow time 30-100 seconds, in line with international standards design, suitable for rapid viscosity evaluation of newtonian fluids, aluminum alloy structure to ensure durability.
Using reliable mechanical design and microcomputer control technology, Measurement range 1-100000mPa.s, repRoducibility +/- 1% F.S., equipped with USB/RS232 interface to support data recording and printing functions.
Made of stainless steel, the flow hole diaMeter is 2mm, according to DIN 53211, providing accurate viscosity measurement for Newtonian or near newtonian fluids.
Silicone oil standard solution, calibrated viscosity 380cp, capacity 400ml, suitable for Viscometer calibrating.
Measurement range of 25~ 120cSt, outflow aperture of 2.53mm, suitable for laboratory viscosity testing.
Aperture 4.12mm, viscosity measurement range of 70~ 370cSt, aluminum alloy Cup with stainless steel aperture, in line with ASTM D1200 standard, suitable for laboratory viscosity testing.
Flow hole diaMeter 6mm, Cup height 74mm, stainless steel material, in line with international standards, suitable for Newtonian or near newtonian fluid, providing accurate viscosity assessment.
