Disperse emulsification homogeneous mixing under vacuum or pressure environment, processing viscosity up to 10000MPas, Operating temperature 170 ℃, equipped with a variety of sensing systems Measuring temperature, pressure, viscosity and other paraMeters, observing the reaction process through Glass kettle.
The equipment operates under vacuum or pressure conditions, with a processing viscosity of 10000MPas, Operating temperature of 170 ° C, equipped with anchor type screw scraping wall stirring slurry and high shear homogeneous Mulser, supporting Multi-ParaMeter measurement such as material temperature and pressure.
Electric lifting operation is convenient, digital frequency conversion speed range 0-3000 rpm, Power 7.5KW, 304 stainless steel shaft corrosion resistance, matching 300L vacuum closed Tank and vacuum pump, to achieve dispersion, homogenization, emulsification, crushing, coalescence, suspension, dissolving multi-function.
Rotation speed up to 3000 rpm, Flow rate 35m ³/h, multi-layer stator to pRoduce a strong suction force, continuous dispersion shear emulsification, double mechanical sealing to prevent leakage.
The rectangular vacuum Chamber improves space utilization, Vacuum Level up to 133Pa, is equipped with double-decked tempered Glass doors for easy observation, supports program control of heating and vacuum holding time, and improves processing conformity.
Rotation speed of 3000 rpm, Flow rate of 50m ³/h, strong self-priming ability and continuous dispersion emulsification effect, double-ended mechanical sealing design to reduce the risk of leakage.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
Multi-layer rotating stator structure, Rotation speed of 3000rpm, Flow rate 25m3/h, with strong self-priming ability and continuous dispersion emulsification effect, double-ended mechanical sealing design to reduce leakage.
Rotation speed up to 3000 rpm, Flow rate 60m ³/h, multi-layer rotating stator generates strong suction force, continuous dispersion shear emulsification, double-ended mechanical sealing to prevent leakage, smooth operation and low maintenance cost.
Multi-layer rotating stator structure, Rotation speed of 3000 rpm, Flow rate 20m ³/h, with strong self-priming ability and continuous dispersion emulsification effect, double-end mechanical sealing design effective anti-leakage.
Rotation speed up to 3000rpm, Flow rate 4.5m ³/h, multi-layer rotating stator structure generates strong self-priming force, through shearing and dispersion to achieve fine emulsification, double-ended mechanical sealing anti-leakage.
Equipment line speed of more than 20m/s, multi-layer stator gap is small, shearing fineness is good, can achieve continuous circulation of materials dispersed emulsification, processing viscosity ≤ 20000cps, high emulsification efficiency and pRoduct stability.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
The effective volume utilization rate of rectangular vacuum Chamber is high, each layer can be independently heated and vacuumed to inject nitrogen without interfering with each other, the temperature control accuracy is +/- 1 ℃, the Vacuum Level is 133Pa, and the double-decked tempered Glass door is easy to observe.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
